PRODUCTS, MARKETS, APPLICATIONS

The level of gloss is necessary for the appearance of coatings. The brand ACEMATT® offers a variety of products to the formulator finding the right balance of effectiveness for matting properties and easy incorporation into the coating system. The full spectrum of matting levels such as semi-gloss, mat and semi-mat can be reached by using the precipitated and thermal silica based matting agents.

The rheological properties of paints and coatings can be regulated according to the needs with either hydrophilic or hydrophobic AEROSIL® grades. Added amounts of 0.3 – 1.0 %, based on the total formulation, are typical in nearly all solvent and waterborne systems, as well as in high solids coatings. The incorporation of AEROSIL® particles into a coating generally produces a pseudoplasticity that is often linked with a thixotropic effect.

DICY for 1K heat cure adhesives and composites and polycarbamide curing agents used with polyisocyanate resins for coatings.

Polyamide and amidoamine curing agents for use across all major epoxy applications.

Aliphatic & cycloaliphatic amine curing agents for use across all major epoxy applications.

Curing agents for waterborne floor coatings and concrete primers.

Specialty waterborne epoxy resins for flooring and industrial coating applications.

Nonreactive polyamides for hot-melt and printing ink applications.

Latent catalyst for powder applications.

Waterborne epoxy curing agents for industrial flooring and protective coatings.

Waterborne epoxy curing agents for industrial flooring and protective coatings.

Specialty wetting agents, dispersants, emulsifiers and antifoams for use in tank-mix adjuvants and pesticide formulations.

Masonry water repellents for dry-mix mortars and concrete, as well as antifoams and air entrainers for structure and building protection.

Single molecules have the potential to perform outstandingly, but crosslinked molecules surpass the level of superior performance. E.g. they increase the stability of the coating and improve the resistance towards environmental impacts.

Curezol imidazole accelerators for glass epoxy laminate and epoxy molding compound.

Curezol is a registered trademark of Shikoku Chemical Corporation.

Dicyandiamide (DICY) for one component heat cure adhesives and composites.

Waterborne epoxy curing agents for industrial flooring and protective coatings.

Mono- and difunctional reactive diluents.

PUD acrylic hybrid dispersions for industrial coatings.

Imidazole accelerators for structural applications.

Surface active products and chemical building blocks for formulation, for direct use and for chemical synthesis.

Defoamers, emulsifiers and corrosion inhibitors for metalworking fluids, metal cleaners and diesel fuel.

Blocked isocyanates and polyamide adhesion promoters for PVC plastisols.

VISCOPLEX® and VISCOBASE®: Tailor-made solutions for today's lubrication challenges.

Peracetic acid is an equilibrium mixture of peracetic acid, hydrogen peroxide, acetic acid and water.

Specialty additives for masterbatches and compounds like antiscratch and dispersing additives, odor absorbers and antistats.

Defoamers, wetting agents and thickeners for the production, processing and application of PVC, polymer dispersions and adhesives.

Evonik Industries provides a wide range of additives used in the manufacture of various types of polyurethane foam.

Improvement of Flowability and Caking Tendency.

Polyamide and amidoamine curing agents for use across all major epoxy applications.

Substrate wetting additives enable uniform wetting for coatings and printing inks even on very low energy or contaminated surfaces. Good wetting is a fundamental prerequisite for optimum adhesion. Defects in the coating surface such as cratering and poor leveling are minimized or improved.

Curing agent for use in high humid environments.

Radiation curing silicones (free-radical and cationic) for release liners in the hygiene, label and tape industries.

TMT 15® stands for Environmentally friendly separation of heavy metals from waste water.

TROGAMID®—clearly convincing polyamides.

Polyurethane crosslinkers for powder coatings.

VESTAKEEP® PEEK is a high performance plastic for future technologies.

Epoxy and PUR based resin formulations for automotive lightweight solutions.

Polyamides in a Custom-Made Suit - consistent in processing, versatile in design.

Curing agents for epoxy resin systems, chain extender for PUR systems and raw material for polyamides.

Aliphatic and cycloaliphatic diisocyanate monomers for light stable PUR resins and elastomers. Cycloaliphatic polyisocyanates for durable 1K and 2K PUR coatings.

Silane-urethane hybrid crosslinkers for scratch-resistant coatings.

Specialty solvents and intermediates for the coatings and printing ink industry.

More than 40 specialty methacrylates, offering a versatile toolbox to solve challenges in a broad range of applications.