Productzoeker

• A
• M

• Y

• B
• N
• Z
• C
• O

• 0

• D
• P
• 1
• E

• Q

• 2
• F
• R
• 3
• G
• S
• 4
• H
• T
• 5
• I
• U

• 6

• J

• V

• 7

• K

• W

• 8

• L
• X

• 9

Results

602 products found for search term "A".

• ABIL® 350

  Moisture barrier especially for skin care or skin protection formulations. Perfume and active substance fixative. Improves application properties. Non-sticky. Good emollients properties. Elimination of whitening effect from O/W emulsions.

• ABIL® B 8832

  Nonionic silicone conditioning agent for clear shampoos and shower gels. Improves synergistically the conditioning properties of cationic polymers like Polyquaternium-10 and cationic guar.

• ABIL® B 8843

  Improves skin feel of shower gels, shampoos, etc. Stable, creamy foam. Plastisizing agent for hair setting polymers and hair fixatives.

• ABIL® B 8851

  Improves wet combability. Pleasant feel on wet hair. Lubricant in shaving foams.

• ABIL® B 8852

  Improves wet and dry comb properties. Strongly refatting because of its lipophilic character.

• ABIL® B 9950

  Conditioning agent for shampoos. Softens and smooths hair. Improves manageability.

• ABIL® Care 85

  Silicone-based emulsifier for cosmetic O/W lotions and creams with a velvety-silky skin feel. Compatible with a wide range of cosmetic oils.

• ABIL® Care XL 80 MB

  Silicone O/W emulsifier providing an outstanding combination of stabilization and formulation flexibility. It provides a velvety-silky skin feel and long lasting skin smoothing perception. Additional hair conditioning properties.

• ABIL® EM 180

  Versatile high molecular weight W/O emulsifier with outstanding stabilization capabilities. Very low usage concentation down to 0.5% possible. Particularly recommended for challenging formulation systems like quick breaking emulsions or high UV filter loadings.

• ABIL® EM 90

  The classical high-performance W/O emulsifier for lotions and creams with an excellent stabilization profile. Formulations with all kinds of cosmetic oils. High compatibility with active ingredients. Emulsifier for sun protection preparations with high content of organic and/or physical UV filters.

• ABIL® EM 97 S

  Emulsifier for cosmetic water-in-silicone emulsions as well as co-emulsifier for water-in-oil and oil-in-water emulsions imparting a velvety and silky skin feel. Good release properties of AP salts in W/Si-based AP/deo formulations. Suitable for make-up, skin care and sun care formulations.

• ABIL® ME 45 MB

  The easy-to-use, multiple benefit silicone conditioning agent . New patent protected PEG- and preservative-free microemulsion with excellent and intensive conditioning, extraordinary manageability and smoothness of hair. ABIL® ME 45 MB significantly improves the wash fastness of dyed hair and shows outstanding heat protecting properties. Can be added just by simple stirring and enables brilliant clear shampoo formulations.

• ABIL® Quat 3272

  Conditioning agent for clear shampoos and shower baths. Completely soluble in aqueous surfactants solutions. Pleasant skin feel. As conditioning agent it improves feel and gloss of hair.

• ABIL® Soft AF 100

  Conditioning agent for shampoos and hair rinses. Improves the body and volume of hair. Strongly substantive to hair and skin proteins. Self emulsifying in aqueous systems. Improves synergistically volume properties of alkylquats.

• ABIL® T Quat 60

  Premium conditioning agent with additional hair fiber protection properties.

• ABIL® Wax 9800

  Liquid to waxy component for skin and hair care emulsions, color cosmetics and deodorant sticks. The silicone component provides optimum cosmetic properties like silky gloss on hair and a pleasant, non-greasy skin feel. The product is easy to emulsify and soluble in cosmetic oils. Has an emollient character and improves pigment dispersion.

• ABIL® Wax 9801

  Enhances spreading behavior which leads to a better distribution of pigments and inorganic/organic UV filters in emulsion systems.

• ABIL® Wax 9840

  Enhances spreading behavior which leads to a better distribution of pigments and inorganic/organic UV filters in emulsion systems.

• ABIL® WE 09 MB

  Emulsifier for cosmetic W/O creams and lotions. Formulations with all kinds of cosmetic oils. High compatibility with active ingredients. Emulsifier for decorative cosmetics and sun protection preparations.

• ABIL® Quat 3676

  A globally accepted conditioning agent with a pronounced silicone character and excellent conditioning benefits. Mainly suitable for emulsion type conditioners / conditioning rinses, masks and conditioning shampoos (opacified/pearlized formulations). It provides an intensive conditioning effect making it suitable also for thicker hair types (e.g. Asian, Ethnic hair). Trends served: Selfie ready, overnight hair care products, hair masks, Halal.

• ACCUREL® AF 450

  ACCUREL® AF 450 is a cold/hot antifog masterbatch for films and sheets based on styrene-butadiene copolymer.

• ACCUREL® AF 701

  ACCUREL® AF 701 is a cold and hot antifog Agent.

• ACCUREL® GA 302

  ACCUREL® GA 302 is an antistatic masterbatch for styrenic films, sheets or injection molded parts.

• ACCUREL® GA 303

  ACCUREL® GA 303 is a cell stabilizer, especially for EVA foams.

• ACCUREL® GA 320

  ACCUREL® GA 320 is used as an antifog agent for polyethylene-based packaging films.

• ACCUREL® SF 112

  ACCUREL® SF 112 is a combination of antistatic agents used for general short- and long-term antistatic performance in polyolefinic applications.

• ACCUREL® SF 1710

  ACCUREL® SF 1710 gives molded parts a smoother surface appearance.

• ACCUREL® SF 1760

  The active ingredient of ACCUREL® SF 1760 is a fast migrating primary amide, which provides excellent antiblock and release properties in films, sheets as well as injection molded parts.

• ACCUREL® SF 261

  ACCUREL® SF 261 is used as a semi-permanent internal antistatic agent for PP and PE applications like films or injection molded parts.

• ACCUREL® SF 268

  ACCUREL® SF 268 is a long term internal antistatic agent. It provides a sustained antistatic Performance.

• ACCUREL® SF 660

  ACCUREL® SF 660 is an excellent slip agent and significantly reduces the coefficient of friction on the surface of PP/PE/EVA based films and sheets at temperatures below 60 °C.

• ACCUREL® Si 703

  ACCUREL® Si 703 is a lubricant and release agent for molded parts made from polyethylene.

• ACCUREL® Si 752

  ACCUREL® Si 752 acts as a fast and effective lubricant and mold release agent for HDPE based applications.

• ACCUREL® Si 753

  ACCUREL® Si 753 acts as a fast and effective lubricant and mold release agent for polystyrene based parts.

• ACCUREL® Si 761

  ACCUREL® Si 761 improves slip and lubrication properties in PP applications. It supports the release of injection-molded parts.

• ACCUREL® Si 792

  ACCUREL® Si 792 acts as an effective lubricant and mold release agent for polycarbonate.

• ACCUREL® Si 796

  ACCUREL® Si 796 is used as a lubricant and fast acting mould release agent for polypropylene applications.

• ACCUREL® SL 810

  ACCUREL® SL 810 reduces the friction and the blocking of PC surfaces.

• ACCUREL® SL 811

  ACCUREL® SL 811 reduces friction and blocking of PET surfaces.

• ACCUREL® WF 100

  ACCUREL® WF 100 is used as foaming agent masterbatch for TPV based sealings and other foamed TPV based parts.

• ACCUREL® XP 200

  ACCUREL® XP 200 is a porous HDPE carrier for the production of additive concentrates at loading temperatures up to 60°C via physical absorption of the additive.

• ACCUREL® XP 550

  ACCUREL® XP 550 is a porous EMA carrier for the production of additive concentrates at loading temperatures up to 60°C via physical absorption of the additive.

• ACCUREL® XP 601

  ACCUREL® XP 601 is a porous PC carrier for the production of additive concentrates at loading temperatures up to 60°C via physical absorption of the additive.

• ACCUREL® XP 700

  ACCUREL® XP 700 is a porous PA6 carrier for the production of additive masterbatches via absorption of liquid additives at processing temperatures up to 100 °C.

• ACCUREL® XP 712

  ACCUREL® XP 712 is a porous PA12 carrier for the production of additive concentrates at temperatures up to 100°C via physical absorption of the additive.

• ACCUREL® XP 850

  ACCUREL® XP 850 is a porous SBC carrier for the production of additive masterbatches via absorption of liquid additives at processing temperatures up to 40 °C.

• ACCUREL® XP 851

  ACCUREL® XP 851 is a porous SAN carrier for the production of additive masterbatches via absorption of liquid additives at processing temperatures up to 75 °C.

• ACCUREL® AF 401

  ACCUREL® AF 401 is used as an anti-fogging masterbatch for (L)LDPE based agricultural films.  

• ACCUREL® FR 504

  ACCUREL® FR 504 is a halogen free flame retardant high concentrate for extruded or injection molded components and profiles made from styrenic resins and compounds.

• ACCUREL® FR 512

  Mixture of resorcinol bis(diphenylphosphate), PTFE anti-dripping agent and porous polycarbonate (PC).

• ACCUREL® FR 519

  ACCUREL® FR 519 contains a halogen free flame retardant for injection molded components and profiles made from PC or PC/ABS compounds.

• ACCUREL® GA 300

  ACCUREL® GA 300 is a haptic enhancer for PP fibres and at the same time a fast working antistatic agent for PP films, sheets or injection molded parts.

• ACCUREL® GA 301

  ACCUREL® GA 301 is a fast working antistatic agent for polyolefin-based films, sheets or injection molded parts.

• ACCUREL® GA 314

  ACCUREL® GA 314 is used as an cold antifog agent for food packaging films like PP blown films, cast films and biaxially oriented films.

• ACCUREL® GA 354

  ACCUREL® GA 354 works as an effective cell stabilizing agent in polyolefin applications, especially in PE foams.

• ACCUREL® GA 372

  ACCUREL® GA 372 is used as a long-term antistatic agent in PE films and injection molded parts even at low relative air humidity.

• ACCUREL® GA 381

  ACCUREL® GA 381 gives a long-term antistatic performance to sheets and films based on polystyrene or styrene-butadien-copolymer.

• ACCUREL® SF 179

  The active ingredient in ACCUREL® SF 179 is a long-term internal antistatic agent and provides sustained antistatic performance in PE applications.

• ACCUREL® SF 266

  ACCUREL® SF 266 is a long-term internal antistatic agent. It provides a sustained antistatic performance and shows an excellent thermal stability due to its saturated alkyl chain.

• ACCUREL® SF 271

  ACCUREL® SF 271 is a synergistic combination of slip and antistatic additives for biaxial oriented polypropylene (BOPP) films, such as general-purpose films, adhesive and paper lamination films.

• ACCUREL® SF 610

  ACCUREL® SF 610 is an excellent slip agent. It significantly reduces the coefficient of friction on the surface of PP films and sheets at temperatures below 60 °C.

• ACCUREL® SF 617

  ACCUREL® SF 617 enhances the haptic properties of PP fibres and nonwovens.

• ACCUREL® SF 640

  ACCUREL® SF 640 is an excellent slip and mold release agent for polyethylene films and injection molded parts.

• ACCUREL® SF520

  Mixture of vegetable based lauric diethanol amide and porous LLDPE.

• ACCUREL® Si 707

  ACCUREL® Si 707 significantly reduces the coefficient of friction (COF) when incorporated in the skin layer of biaxially oriented polypropylene (BOPP) films.

• ACCUREL® Si 754

  ACCUREL® Si 754 acts as a fast and effective lubricant and mold release agent for HDPE based parts.

• ACCUREL® Si 755

  ACCUREL® Si 755 is an excellent mould release agent for finished polyamide parts.

• ACCUREL® Si 790

  ACCUREL® Si 790 acts as a fast and effective lubricant and mold release agent for PET.

• ACCUREL® Si 803

  ACCUREL® Si 803 acts as a permanent lubricant and slip agent for instance for HDPE pipes.

• ACCUREL® XP 100

  ACCUREL® XP 100 is a porous PP carrier for the production of additive masterbatches via absorption of liquid additives at processing temperatures up to 100 °C.

• ACCUREL® XP 400

  ACCUREL® XP 400 is a porous LDPE carrier for the production of additive concentrates at loading temperatures up to 70°C via physical absorption of the additive.

• ACCUREL® XP 500

  ACCUREL® XP 500 is a porous EVA carrier for the production of additive concentrates at loading temperatures up to 60°C via physical absorption of the additive.

• ACCUREL® XP 650

  ACCUREL® XP 650 is a porous PMMA carrier for the production of additive concentrates at loading temperatures up to 80°C via physical absorption of the additive.

• ACCUREL® XP 800

  ACCUREL® XP 800 is a porous GPPS carrier for the production of additive masterbatches via absorption of liquid additives at processing temperatures up to 70 °C.

• ACCUREL® XP 880

  ACCUREL® XP 880 is a porous ABS carrier for the production of additive masterbatches via absorption of liquid additives at processing temperatures up to 90 °C.

• ACCUREL® XP 900

  ACCUREL® XP 900 is a porous PET carrier for the production of additive masterbatches via absorption of liquid additives at processing temperatures up to 80 °C.

• ACCUREL® XP 950B

  ACCUREL® XP 950B is a porous carrier from biodegradable polyester for the production of additive masterbatches via absorption of liquid additives at processing temperatures up to 60 °C.

• ACCUREL® XP 951B

  ACCUREL® XP 951B is a porous PLA carrier for the production of additive masterbatches via absorption of liquid additives at processing temperatures up to 50 °C.

• ACCUREL® XP100-84

  Porous carrier resin completely made from polypropylene.

• ACCUREL® XP200-82

  Porous carrier resin completely made from high density polyethylene (HDPE).

• ACEMATT® 3300

  ACEMATT® 3300 is an advanced polymer-treated thermal silica, characterised by very good matting efficiency combined with high transparency. It has been developed to use in soft-feel coatings with high haptic requirements.

• ACEMATT® 3600

  ACEMATT® 3600 is a very fine-grained polymer-treated precipitated silica, specially developed for 100% radically curing UV-coatings.

• ACEMATT® 790

  ACEMATT® 790 as untreated, fine particle sized precipitated silica is distinguished by high matting efficiency and particularly suitable for pigmented coatings systems.

• ACEMATT® 810

  ACEMATT® 810 as untreated coarse-grained precipitated silica is distinguished by high matting efficiency and particularly suitable for pigmented coatings systems.

• ACEMATT® 810 Taiwan

  ACEMATT® 810 as untreated coarse-grained precipitated silica is distinguished by high matting efficiency and particularly suitable for pigmented coatings systems.

• ACEMATT® 82

  ACEMATT® 82 is an untreated precipitated silica with a very high matting efficiency.

• ACEMATT® HK 125

  ACEMATT® HK 125 is an untreated coarse-grained precipitated silica with heterogeneous particle size distribution.

• ACEMATT® HK 400

  ACEMATT® HK 400 is an untreated fine-grained precipitated silica primarily used in pigmented coatings systems.

• ACEMATT® HK 440

  ACEMATT® HK 440 is an untreated extremely coarse-grained precipitated silica, particularly suitable for pigmented coatings systems with very low sheen (85° reflectometer value).

• ACEMATT® HK 450

  ACEMATT® HK 450 is an untreated coarse-grained precipitated silica, particularly suitable for pigmented coatings systems.

• ACEMATT® OK 412

  ACEMATT® OK 412 is a fine-grained wax after-treated precipitated silica. This effective matting agent is suitable for pigmented coatings and due to the remarkable suspension behaviour it is particularly suitable for clear coatings and other non-pigmented systems.

• ACEMATT® OK 412 LC

  ACEMATT® OK 412 LC is a fine-grained wax after-treated precipitated silica.

• ACEMATT® OK 500

  ACEMATT® OK 500 is a fine-grained wax after-treated precipitated silica, which is suitable for pigmented as well as non-pigmented systems and due to the excellent suspension behaviour particularly applicable in clear coatings.

• ACEMATT® OK 520

  ACEMATT® OK 520 is a fine-grained wax after-treated precipitated silica. This matting agent is suitable for pigmented, as well as non-pigmented systems and due to the suspension behaviour particularly applicable in clear coatings.

• ACEMATT® OK 607

  ACEMATT® OK 607 is a very fine-grained wax after-treated precipitated silica. This matting agent is suitable for pigmented, as well as non-pigmented systems and due to the suspension behaviour particularly applicable in clear coatings.

• ACEMATT® OK 607 LC

  ACEMATT® OK 607 LC is a very fine-grained wax after-treated precipitated silica.

• ACEMATT® OK 900

  ACEMATT® OK 900 is a treated precipitated silica with a medium particle size.

• ACEMATT® TS 100

  ACEMATT® TS 100 is an untreated thermal silica characterised by very high matting efficiency combined with very high transparency. Thanks to the unique properties ACEMATT® TS 100 is particularly suitable for coating systems that are difficult to matte.

• ACEMATT® TS 100/20

  ACEMATT® TS 100/20 is an untreated thermal silica characterised by very high matting efficiency combined with high transparency. The particle size distribution in ACEMATT® TS 100/20 is slightly broader than in ACEMATT® TS 100.Thanks to the unique properties ACEMATT® TS 100/20 is particularly suitable for coating systems that are difficult to matt.

• ACEMATT® 3300

  ACEMATT® 3300 is a specially after-treated thermal silica with a unique property profile. Along with excellent matting efficiency, it can be the solution for multiple tasks in fomulating coatings.

• ACEMATT® 3400

  ACEMATT® 3400 is a specially after-treated thermal silica with a unique property profile. Along with high matting efficiency and high transparency, it can be used in a large variety of coatings. Especially for water-based coatings and soft-touch formulations with a high surface smoothness.

• ACEMATT® 3600

  ACEMATT® 3600 is a fine particle sized specially after-treated precipitated silica, ideal for UV-coatings. It is particularly suitable for matting very thin or very thick UV-coating films.

• ACEMATT® 790

  ACEMATT® 790 is an untreated, medium particle sized precipitated silica. It is especially recommended for coil coatings, as well as general industrial coatings.

• ACEMATT® 810

  ACEMATT® 810 is an untreated, coarse particle sized precipitated silica. It is especially recommended for coil coatings, as well as general industrial coatings.

• ACEMATT® HK 125

  ACEMATT® HK 125 is an untreated, coarse particle sized precipitated silica with heterogeneous particle size distribution. It is recommended for decorative coatings.

• ACEMATT® HK 400

  ACEMATT® HK 400 is an untreated, medium particle sized precipitated silica. It is especially recommended for pigmented systems.

• ACEMATT® HK 440

  ACEMATT® HK 440 is an untreated, extremely coarse particle sized precipitated silica. It is especially recommended for base coats, thick-film applications, and general industrial coatings.

• ACEMATT® OK 412

  ACEMATT® OK 412 is a wax-treated, medium particle sized precipitated silica. By offering very high compatibility, it can be used in a large variety of coatings.

• ACEMATT® OK 500

  ACEMATT® OK 500 is a wax-treated, medium particle sized precipitated silica. By offering very high compatibility, it can be used in a large variety of coatings. It has been optimized to have a minimal impact on drying times.

• ACEMATT® OK 520

  ACEMATT® OK 520 is a wax-treated, medium particle sized precipitated silica. Providing very high compatibility it can be used in a large variety of coatings.

• ACEMATT® OK 607

  ACEMATT® OK 607 is a fine particle sized wax-treated precipitated silica. It is suitable for pigmented and non-pigmented systems.

• ACEMATT® OK 607 LC

  ACEMATT® OK 607 LC is a fine particle sized wax-treated precipitated silica very much comparable to its twin-product ACEMATT® OK 607, but with lower conductivity. Therefore it is much used in E-Coat systems. It is suitable for pigmented and non-pigmented systems.

• ACEMATT® OK 900

  ACEMATT® OK 900 is a highly efficient, medium particle sized, wax-treated precipitated silica. It is especially recommended for coil coatings as well as general industrial coatings.

• ACEMATT® TS 100

  ACEMATT® TS 100 is an untreated thermal silica with outstanding properties. It provides very high efficiency and transparency. It can be used in a large variety of coatings.

• ACEMATT® TS 100/20

  ACEMATT® TS 100/20 is an untreated thermal silica with outstanding properties. It provides very high efficiency and transparency. It's particle size distrbution is slighty broader than ACEMATT® TS 100.

• Acryl-EZE® - Aqueous Acrylic Enteric System

  Combining the benefits of a fully formulated coating system by Colorcon with the features and performance of a globally accepted enteric polymer, EUDRAGIT®  L100-55, an Evonik product.

• Acrylic Acid
• Acrylic Urethane 853

  Solvent containing colorants in an acrylic polyol The hydroxyl functional vehicle crosslinks with isocyanate to provide outstanding chemical resistance properties Designed for use in acrylic urethane coatings Machine Dispensable or In-plant use Strength controlled to +/- 5%

• Acrylspachtelmasse

  reactive resin based on MMA/PMMA

• ASPERIX®

  ASPERIX® Vet is a hydrogen peroxide grade specifically developed for the effective and sustainable treatment in aquaculture against sea lice infestation. It delivers immediate results and has a withdrawal period of zero days.

• ADDID® 230

  ADDID® 230 is a solvent-free anti-static additive used to increase the conductivity of coating formulations.

• ADDID® 900

  ADDID® 900 is an adhesion promoter for solventborne and waterborne primers and coating formulations. It is based on an amino-functional silane.

• ADDID® 911

  ADDID® 911 is an adhesion promoter for solventborne and waterborne primers and coating formulations. It is based on an epoxy-functional silane.

• ADOGEN® 113

  ADOGEN® 113 - a liquid, fully-saturated amine with extremely low pour point. The methyl branching is responsible for the low pour point and liquidity, and contributes to the good solvent miscibility of the amine.

• ADOGEN® 140

  ADOGEN® 140 is primary hydrogenated tallow amine produced from stearyl fatty acid.

• ADOGEN® 140 D

  ADOGEN® 140 D is distilled primary hydrogenated tallow amine produced from stearyl fatty acid.

• ADOGEN® 142

  ADOGEN® 142 is a primary stearyl amine produced from high C18 content fatty acid.

• ADOGEN® 142 D

  ADOGEN® 142 D is a distilled primary stearyl amine produced from high C18 content fatty acid.

• ADOGEN® 160 D

  ADOGEN® 160 D is distilled primary amine produced from coconut fatty acid.

• ADOGEN® 160 D EO

  ADOGEN® 160 D EO is distilled primary amine produced from coconut fatty acid.

• ADOGEN® 163 D

  ADOGEN® 163 D is a distilled primary lauryl amine.

• ADOGEN® 170

  ADOGEN® 170 is primary amine produced from tallow fatty acid.

• ADOGEN® 170 D

  ADOGEN® 170 D is distilled primary amine produced from tallow fatty acid.

• ADOGEN® 170 D EO

  ADOGEN® 170 D EO is distilled primary amine produced from tallow fatty acid. Fatty amines are weak bases soluble in common organic solvents such as benzene, hexane, and isopropanol but insoluble in water. Salts prepared by reacting the amines with acetic acid are water dispersible.

• ADOGEN® 172

  ADOGEN® 172 is primary oleyl amine of vegetable origin.

• ADOGEN® 172 D

  ADOGEN® 172 D is distilled primary oleyl amine of vegetable origin.

• ADOGEN® 343 HP

  ADOGEN® 343 HP is methyl dihard tallow amine.

• ADOGEN® 349

  ADOGEN® 349 is a distearyl methyl tertiary amine.

• ADOGEN® 364

  ADOGEN® 364 is a trialkyl amine. Tri-(C8-C10) alkyl amines.

• ADOGEN® 369

  ADOGEN® 369 is Di-coco methyl tertiary amine.

• ADOGEN® 442 75%

  ADOGEN® 442 75% is dimethyl dihydrogenated tallow ammonium chloride.

• ADOGEN® 442 E 83%

  ADOGEN® 442 E 83 is dimethyl di(C14-C18 alkyl) ammonium chloride supplied at 83% activity in aqueous ethanol.

• ADOGEN® 442 H

  ADOGEN® 442 H is dimethyl dihydrogenated tallow ammonium chloride.

• ADOGEN® 442 H 83

  ADOGEN® 442 H 83% is dimethyl di (C14-C18 alkyl) ammonium chloride supplied at 83% activity in aqueous isopropanol.

• ADOGEN® 442 PG

  ADOGEN® 442 PG is dimethyl dihydrogenated tallow ammonium chloride, supplied in propylene glycol.

• ADOGEN® 442-100 P

  ADOGEN® 442-100 P is dimethyl dihydrogentated tallow ammonium chloride, supplied as a powder.

• ADOGEN® 444 - 29W

  ADOGEN® 444-29W is a Palmityl trimethyl ammonium chloride in water.

• ADOGEN® 462-75%

  ADOGEN® 462-75% quaternary is dicoco dimethyl ammonium chloride supplied at approximately 75% actives in IPA.

• ADOGEN® 464 (85%)

  ADOGEN® 464 (85%) is a methyl tri C8-C10 ammonium chloride supplied at approximately 85% actives in IPA/water. ADOGEN® 464 (85%) is made form synthetic or vegetable based raw materials.

• ADOGEN® 464 HF

  ADOGEN® 464 HF is a methyl tri C8-C10 ammonium chloride supplied at approximately 90% actives in C8-C10 alcohol. ADOGEN® 464 HF is made from synthetic or vegetable based raw materials. This product is a special order item, please contact the sales manager for more information. 

• ADOGEN® 471 E

  ADOGEN® 471 E is tallow trimethyl ammonium chloride in ethanol.

• ADOGEN® 477 E

  ADOGEN® 477 E is a tallow diamine pentamethyl dichloride in ethanol.

• ADOGEN® 513

  ADOGEN® 513 is an iso-tridecyl ether diamine. ADOGEN® 513 – a liquid, fully-saturated diamine with extremely low pour point. The methyl branching is responsible for the low pour point and liquidity, and contributes to the good solvent miscibility of the diamine.

• ADOGEN® 570 S

  ADOGEN® 570 S is tallow-1,3-propylene diamine.

• ADOGEN® 572

  ADOGEN® 572 oleyl diamine is an oleyl-1, 3-propylene diamine.

• ADOGEN® 66

  ADOGEN® 66 is a water soluble cationic surfactant, suggesting uses as a solids enhancer for softener formulations, dispersing agent, highly effective antistat, formulation aid, dye retarder and general purpose emulsifier.

• ADOGEN® RA 20

  ADOGEN® RA 20 is a quaternary amine, tri capryl methyl ammonium chloride, on a silica support.

• ADOGEN® 172*

  *not available in the EU - Absorbs well on negatively charged surfaces.

• ADOGEN® 442 PG

  Dihydrogenated tallow dimethyl ammonium chloride

• ADOGEN® 462-75

  Dicoco dimethyl ammonium chloride

• ADOGEN® 570 S*

  *not available in the EU - Absorbs well on negatively charged surfaces.  

• ADOGEN® 572*

  *not available in the EU - Absorbs well on negatively charged surfaces.

• ADOGEN® 66

  Alkoxylated fatty quarterary

• ADOGEN® 141 D

  Absorbs well on negatively charged surfaces

• ADOGEN® 140
• ADOGEN® 140 D LOW IV
• ADOGEN® 160 D
• ADOGEN® 442 ACE
• ADOGEN® 442 (75%)

  Traditional quat for fabric softeners with premium softness and good anti-static properties. Appearance: white solid Typical activity/solids: 75% in isopropylic alcohol  

• ADOGEN® 442 E (83%)

  Traditional quat for fabric softeners with premium softness and good anti-static properties.  

• ADOGEN® 442 EXPORT

  Traditional quat imparts premium softness and good anti-static properties to fabrics and textiles.  

• ADOGEN® 66

  Liquid additive for fabric softeners at 100% solids, very effective as an anti-static agent, which helps to stabilize formulations.

• AERODISP® W 7520

  AERODISP® W 7520 is a 20% dispersion of hydrophilic AEROSIL® fumed silica with slightly alkaline pH-value.

• AERODISP® W 7520 N

  AERODISP® W 7520 N is an aqueous dispersion of a hydrophilic fumed silica with an alkaline ph-value.

• AERODISP® W 7520 P

  AERODISP® W 7520 P is an aqueous dispersion of a hydrophilic fumed silica with an alkaline ph-value.

• AERODISP® WR 8520

  AERODISP® WR 8520 is a 20% dispersion of a hydrophobic fumed AEROSIL® (dimethyldichlorosilane).

• AEROSIL® 200

  AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m2/g. Widely usable in a broad range of applications.

• AEROSIL® 300

  AEROSIL® 300 is a hydrophilic fumed silica with a specific surface area of 300 m2/g. It provides a very strong rheological effect.

• AEROSIL® 380

  AEROSIL® 380 is a hydrophilic fumed silica with a specific surface area of 380 m2/g.

• AERODISP® G 1220

  AERODISP® G 1220 is a low thickening AEROSIL® dispersion based on ethylene glycol.

• AERODISP® W 1226

  AERODISP® W 1226 is a water-based dispersion of AEROSIL® fumed silica with a low thickening effect.

• AERODISP® W 1244

  AERODISP® W 1244 is a fumed silica dispersion with very high silica content, specifically developed for the application fire resistant glass. It is tailored to simplify the fire resistant glass manufacturing process and provides outstanding optical and fire test performance of the final glass.

• AERODISP® W 1714

  AERODISP® W 1714 is a water-based, low viscosity dispersion of AEROSIL® fumed silica, stabilized with phosphate.

• AERODISP® W 1824

  AERODISP® W 1824 is a low thickening, water-based AEROSIL® dispersion with a solids content of 24 %.

• AERODISP® W 1836

  AERODISP® W 1836 is a water-based, low viscosity dispersion of AEROSIL® fumed silica with a high solid content.

• AERODISP® W 440

  AERODISP® W 440 is a waterborne dispersion with a high solids content and a slightly acidic pH.

• AERODISP® W 450 ZX

  AERODISP® W 450 ZX is an aluminium oxide dispersion with a high solid content, special anionic stabilization and a neutral pH. The water-based dispersion appears milky-white.

• AERODISP® W 630

  AERODISP® W 630 has a high solid content and slightly acidic pH value. The cationic nature of the alumina in this dispersion makes it ideal to fix dyes. Combined with fast ink absorbtion, it is well suited for high quality inkjet coatings.

• AERODISP® W 640 ZX

  AERODISP® W 640 ZX is a highly concentrated aqueous aluminum oxide dispersion with special anionic stabilization and neutral pH value. The dispersion appears milky white.

• AERODISP® W 7225 G

  AERODISP® W 7225 G is a low viscosity, water-based dispersion of AEROSIL® fumed silica, with a slightly alkaline pH.

• AERODISP® W 7225 P

  AERODISP® W 7225 P is a low viscosity, water-based dispersion of electronic grade AEROSIL® fumed silica, with an alkaline pH.

• AERODISP® W 7330 N

  AERODISP® W 7330 N is a water-based dispersion of AEROSIL® fumed silica with a high solids content and an alkaline pH value.

• AERODISP® W 740 X

  AERODISP® W 740 X is an aqueous dispersion of titanium dioxide with a very high solid content and weakly acidic pH value. The dispersion appears milky white.

• AERODISP® W 7512 S

  AERODISP® W 7512 S is a water-based, low viscosity dispersion of AEROSIL® fumed silica, with a slightly acidic pH.

• AERODISP® W 7520

  AERODISP® W 7520 is a low viscosity, water-based dispersion of AEROSIL® fumed silica, with a slightly alkaline pH.

• AERODISP® W 7520 N

  AERODISP® W 7520 N is a low viscosity, water-based dispersion of AEROSIL® fumed silica, with a slightly alkaline pH.

• AERODISP® W 7520 P

  AERODISP® W 7520 P is a low viscosity, water-based dispersion of AEROSIL® fumed silica, with a slightly alkaline pH.

• AERODISP® W 7622

  AERODISP® W 7622 is a low viscosity, water-based dispersion of AEROSIL® fumed silica with a slightly alkaline pH.

• AERODISP® W 925

  AERODISP® W 925 is a dispersion based on AEROXIDE® Alu 130, Evonik's highest surface area fumed aluminum oxide. It is stabilized at a pH value of 4. Many applications can utilize the positive surface charge of the particles in this pH range.

• AERODISP® WK 7330

  Aqueous dispersion of a fumed silica and a fumed mixed oxide with a high solids content and a positive zetapotential.

• AERODISP® WR 8520

  AERODISP® WR 8520 is a special, structured, highly filled dispersion of hydrophobic AEROSIL®.

• AEROPERL® 300 Pharma

  AEROPERL® 300 Pharma is a granulated high purity colloidal silicon dioxide for use in pharmaceutical products (tested according to USP/NF and Ph. Eur. Monograph 0434).

• AEROPERL® 300/30

  AEROPERL® 300/30 is a specifically granulated hydrophilic fumed silica.

• AEROPERL® 3375/20

  AEROPERL® 3375/20 is a hydrophilic fumed silica grade with small amounts of alumina manufactured with a further special granulation process.

• AEROSIL® 130

  AEROSIL® 130 is a hydrophilic fumed silica with a specific surface area of 130 m2/g.

• AEROSIL® 130 V

  AEROSIL® 130 V is a densified hydrophilic fumed silica with a specific surface area of 130 m2/g.

• AEROSIL® 150

  AEROSIL® 150 is a hydrophilic fumed silica with a specific surface area of 150 m2/g.

• AEROSIL® 200

  AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m2/g.

• AEROSIL® 200 F

  AEROSIL® 200 F is a hydrophilic fumed silica with a specific surface area of 200 m2/g. This special grade is manufactured according to HACCP-Guidelines. The production and packaging process in Antwerp / Belgium has been audited and fulfills the requirements of regulation EC No. 852/2004. For feed applications the material has been FAMI-QS certified.

• AEROSIL® 200 Pharma

  AEROSIL® 200 Pharma is a high purity amorphous anhydrous colloidal silicon dioxide for use in pharmaceutical products whichfulfils the analytical requirements of the currently valid versions of the European Pharmacopeia (Ph. Eur.), United States Pharmacopeia (USP/NF), Japanese Pharmacopeia (JP) and Indian Pharmacopoeia** (IP). It is tested and certified according to pharmacopoeia methods. It fulfils purity criteria of E551 according to 231/2012 EU. In our production location in Rheinfelden, Germany AEROSIL® 200 Pharma is manufactured and packaged according to IPEC/GMP and HACCP/FAMI-QS guidelines. The production and packaging process has been audited and fulfills the requirements of regulation EC No. 852/2004. TAMC (total aerobic microbial count) , TYMC (total combined yeast and mould count) and Gram-negative bacteria are tested on a regular basis acc. to USP.

• AEROSIL® 200 V

  AEROSIL® 200 V is a densified hydrophilic fumed silica with a specific surface area of 200 m2/g.

• AEROSIL® 200 VV Pharma

  AEROSIL® 200 VV Pharma is a high purity amorphous anhydrous colloidal silicon dioxide with a high tapped density for use in pharmaceutical products (tested according to USP/NF and Ph. Eur. Monograph 0434).

• AEROSIL® 255

  AEROSIL® 255 is a hydrophilic fumed silica with a specific surface area of 255 m2/g.

• AEROSIL® 300

  AEROSIL® 300 is a hydrophilic fumed silica with a specific surface area of 300 m2/g.

• AEROSIL® 300 Pharma

  AEROSIL® 300 Pharma is a high purity amorphous anhydrous colloidal silicon dioxide for use in pharmaceutical products (tested according to USP/NF, Ph. Eur. Monograph 0434 and JP).

• AEROSIL® 300 V

  AEROSIL® 300 V is a densified hydrophilic fumed silica with a specific surface area of 300 m2/g.

• AEROSIL® 380

  AEROSIL® 380 is a hydrophilic fumed silica with a specific surface area of 380 m2/g.

• AEROSIL® 380 F

  AEROSIL® 380 F is a hydrophilic fumed silica with a specific surface area of 380 m2/g. This special grade is manufactured according to HACCP-Guidelines. The production and packaging process in Antwerp / Belgium has been audited and fulfills the requirements of regulation EC No. 852/2004. For feed applications the material has been FAMI-QS certified.

• AEROSIL® 50

  AEROSIL® 50 is a fumed silica with a specific surface area of 50 m2/g.

• AEROSIL® 90

  AEROSIL® 90 is a hydrophilic fumed silica with a specific surface of 90 m2/g.

• AEROSIL® 90 V

  AEROSIL® 90 V is a densified hydrophilic fumed silica with a specific surface area of 90 m2/g.

• AEROSIL® COK 84

  AEROSIL® COK 84 is a mixture of AEROSIL® 200 and highly dispersed fumed aluminum oxide in the ratio of 5:1.

• AEROSIL® MOX 170

  AEROSIL® MOX 170 is a cofumed oxide consisting of silicon dioxide and approximately 1 % aluminum oxide, manufactured using the AEROSIL® process.

• AEROSIL® MOX 80

  AEROSIL® MOX 80 is a cofumed oxide consisting of silicon dioxide and approximately 1% aluminium oxide, manufactured using the AEROSIL® process.

• AEROSIL® NA 130 K

  AEROSIL® NA 130 K is a hydrophobic fumed silica, which has a positive electrostatic charge and provides efficient free flow aid for toners and dry powders in general. This product is applied to reduce the moisture pick-up behaviour of dry powders.

• AEROSIL® NA 50 H

  AEROSIL® NA 50 H is a hydrophobic fumed silica treated with HMDS and aminosilane. Which has a positive electrostatic charge and provides efficient free flow aid for toners and dry powders in general. This product is applied to reduce the moisture pick-up behaviour of dry powders.  This product is also enhancing durability of toners.

• AEROSIL® NA 50 Y

  AEROSIL® NA 50 Y is a hydrophobic fumed silica treated with silicone oil and aminosilane based on AEROSIL® 50.

• AEROSIL® NAX 50

  AEROSIL® NAX 50 is a hydrophobic fumed silica treated with HMDS. Which has a negative electrostatic charge and provides efficient free flow aid for toners and dry powders in general. This product is applied to reduce the moisture pick-up behaviour of dry powders. This product is also enhancing durability of toners.　It can improve mechanical strength with high loading in rubber application.It also achieves good thixotropic property without extreme viscosity increase.

• AEROSIL® NX 130

  AEROSIL® NX 130 is a hydrophobic fumed silica treated with HMDS. Which has a negative electrostatic charge and provides efficient free flow aid for toners and dry powders in general. This product is applied to reduce the moisture pick-up behaviour of dry powders.It is also effective as a rheology controling agent in complex liquid systems.

• AEROSIL® NX 90 G

  AEROSIL® NX 90 G is a hydrophobic fumed silica treated with HMDS.

• AEROSIL® NX 90 S

  AEROSIL® NX 90 S is a hydrophobic fumed silica treated with HMDS.

• AEROSIL® NY 50

  AEROSIL® NY 50 is a hydrophobic fumed silica treated with silicone oil.

• AEROSIL® NY 50 L

  AEROSIL® NY 50 L is a silicon oil treated fumed silica, which has been de-agglomerated to improve dispersibility and effectivity in dry toner.

• AEROSIL® OX 50

  AEROSIL® OX 50 is a fumed silica with a very low specific surface area, low thickening, and high purity. The product can be used as an additive or as a raw material. In polymer composites, high filler loading can be achieved, making it possible to control essential characteristics of polymers.

• AEROSIL® R 104

  AEROSIL® R 104 is a hydrophobic fumed silica after treated with D4 (Octamethylcyclotetrasiloxane).

• AEROSIL® R 104 V

  AEROSIL® R 104 V is a hydrophobic fumed silica after treated with D4 (Octamethylcyclotetrasiloxane).

• AEROSIL® R 106

  AEROSIL® R 106 is a hydrophobic fumed silica after treated with D4 (Octamethylcyclotetrasiloxane).

• AEROSIL® R 202

  AEROSIL® R 202 is a fumed silica surface-treated with polydimethylsiloxane.

• AEROSIL® R 208

  AEROSIL® R 208 is a fumed silica aftertreated with polydimethylsiloxane with excellent thickening properties.

• AEROSIL® R 504

  AEROSIL® R 504 is a hydrophobic fumed silica treated with HMDS and aminosilane.

• AEROSIL® R 709

  AEROSIL® R 709 is a fumed silica aftertreated with a methacrylsilane.

• AEROSIL® R 711

  AEROSIL® R 711 is a fumed silica aftertreated with a methacrylsilane.

• AEROSIL® R 7200

  AEROSIL® R 7200 is a structure-modified fumed silica aftertreated with methacrylsilane to ensure high filler loading.

• AEROSIL® R 805

  AEROSIL® R 805 is a fumed silica aftertreated with organosilane.

• AEROSIL® R 805 VV 90

  AEROSIL® R 805 VV 90 is a fumed silica aftertreated with organosilane.

• AEROSIL® R 812

  AEROSIL® R 812 is a fumed silica aftertreated with organosilane (HMDS) with high specific surface and marked hydrophobia.

• AEROSIL® R 812 S

  AEROSIL® R 812 S is a fumed silica aftertreated with HMDS.

• AEROSIL® R 816

  AEROSIL® R 816 is a fumed silica aftertreated with a hexadecylsilane.

• AEROSIL® R 8200

  AEROSIL® R 8200 is a structure modified with hexamethyldisilazane aftertreated fumed silica.

• AEROSIL® R 9200

  AEROSIL® R 9200 is a structure modified, hydrophobic fumed silica.

• AEROSIL® R 972

  AEROSIL® R 972 is a fumed silica aftertreated with DDS (Dimethyldichlorosilane)

• AEROSIL® R 972 Pharma

  AEROSIL® R 972 Pharma is a high purity, amorphous, anhydrous, hydrophobic colloidal silica for use as an excipient in pharmaceutical products (tested according to Ph. Eur. and USP/NF monographs).

• AEROSIL® R 972 V

  AEROSIL® R 972 V is a densified hydrophobic fumed silica after treated with DDS (Dimethyldichlorosilane) based on a hydrophilic fumed silica with a specific surface area of 130 m2/g.

• AEROSIL® R 974

  AEROSIL® R 974 is a hydrophobic fumed silica aftertreated with DDS (Dimethyldichlorosilane) based on a hydrophilic fumed silica with a specific surface area of 200 m2/g.

• AEROSIL® R 974 V

  AEROSIL® R 974 V is a densified hydrophobic fumed silica aftertreated with DDS (Dimethyldichlorosilane).

• AEROSIL® R 976

  AEROSIL® R 976 is a hydrophobic fumed silica aftertreated with DDS (Dimethyldichlorosilane).

• AEROSIL® R 976 S

  AEROSIL® R 976 S is a hydrophobic fumed silica aftertreated with DDS (Dimethyldichlorosilane).

• AEROSIL® RA 200 H

  AEROSIL® RA 200 H is a hydrophobic fumed silica treated with HMDS and aminosilane based on AEROSIL® 200.

• AEROSIL® RA 200 HS

  AEROSIL® RA 200 HS is a hydrophobic fumed silica treated with HMDS and aminosilane based on AEROSIL® 200.

• AEROSIL® REA 200

  AEROSIL® REA 200 is a positive charged hydrophobic fumed silica.

• AEROSIL® REA 90

  AEROSIL® REA 90 is a positive charged hydrophobic fumed silica.

• AEROSIL® RX 200

  AEROSIL® RX 200 is a hydrophobic fumed silica aftertreated with organosilane (HMDS) with a medium specific surface. Which has a negative electrostatic charge and provides efficient free flow aid for toners and dry powders in general. This product is applied to reduce the moisture pick-up behaviour of dry powders. This product is also effective as a rheology controling agent in complex liquid systems.

• AEROSIL® RX 300

  AEROSIL® RX 300 is a hydrophobic fumed silica treated with HMDS. Which has a negative electrostatic charge and provides efficient free flow aid for toners and dry powders in general. This product is applied to reduce the moisture pick-up behaviour of dry powders. This product is also effective as a rheology controling agent in complex liquid systems.

• AEROSIL® RX 50

  AEROSIL® RX 50 is a hydrophobic special fumed silica treated with HMDS. Which has a negative electrostatic charge and provides efficient free flow aid for toners and dry powders in general. This product is applied to reduce the moisture pick-up behaviour of dry powders. This product is also enhancing durability of toners. It can improve mechanical strength with high loading in rubber application.It also achieves good thixotropic property without extreme viscosity increase.

• AEROSIL® RY 200

  AEROSIL® RY 200 is a hydrophobic fumed silica treated with silicone oil.

• AEROSIL® RY 200 L

  AEROSIL® RY 200 L is a commercially available silicone oil-treated fumed silica, which has been de-agglomerated to improve dispersibility and effectivity in dry toner.

• AEROSIL® RY 200 S

  AEROSIL® RY 200 S is a hydrophobic fumed silica treated with silicone oil.

• AEROSIL® RY 300

  AEROSIL® RY 300 is a hydrophobic fumed silica aftertreated with polydimethylsiloxane with excellent thickening properties and negative electrostatic charge.

• AEROSIL® RY 50

  AEROSIL® RY 50 is a hydrophobic special fumed silica treated with silicone oil. Which has a negative electrostatic charge and provides efficient free flow aid for toners and dry powders in general. This product is applied to reduce the moisture pick-up behaviour of dry powders. This product is also enhancing durability of toners. It can improve mechanical strength with high loading in rubber application.It also achieves good thixotropic property without extreme viscosity increase.

• AEROSIL® RY 51

  AEROSIL® RY 51 is a hydrophobic fumed silica treated with PDMS.

• AEROSIL® TT 600

  AEROSIL® TT 600 is a fumed silica which is characterized by a particularly high degree of agglomeration. The combination of relatively high specific surface area coupled simultaneously with the larger primary structures produces a unique profile of properties, which is different from all other silicas in the portfolio. For instance, the product is recommended as a matting agent or anti-blocking additive with adsorption properties and high transparency.

• AEROXIDE® Alu 130

  AEROXIDE® Alu 130 is produced analogous to the AEROSIL-process developed by Evonik. It is a very fine fumed metal oxide with a very high specific surface area of 130 m2/g. Due to the electropositive chargeability, AEROXIDE® Alu 130 leads to specific properties in various applications.

• AEROXIDE® Alu 65

  AEROXIDE® Alu 65 is produced analogous to the AEROSIL® process developed by Evonik. It is a very fine fumed metal oxide with a high surface area. Due to the electropositive chargeability, AEROXIDE® Alu 65 leads to specific properties in various applications.

• AEROXIDE® Alu C

  AEROXIDE® Alu C is a fine-particulate, pure aluminium oxide (Al2O3) with high specific surface area and marked aggregate and agglomerate structure. Because of it high purity and low water content, the product can be used well as an additive to anorganic materials, for heat insulation, and also as a catalyst substrate. The positive surface charge can be used to control the electrostatic charge.

• AEROXIDE® Alu C 805

  AEROXIDE® Alu C 805 is a fine-particulate, fumed aluminium oxide (Al2O3) that is highly hydrophobized with an organosilane.

• AEROXIDE® STX 501

  AEROXIDE® STX 501 is a hydrophobized fumed silicon-titanium mixed oxide with a titanium dioxide core and a silica shell. It combines the triboelectrical charge attributes of titanium dioxide with the surface properties of a silica. Its high hydrophobicity is imparted by trimethylsilyl-groups which are firmly anchored to the silica surface.

• AEROXIDE® STX 801

  AEROXIDE® STX 801 is a hydrophobized fumed silicon-titanium mixed oxide with a titanium dioxide core and a silica shell. It combines the triboelectrical charge attributes of titanium dioxide with the surface properties of a silica. Its high hydrophobicity is imparted by trimethylsilyl-groups which are firmly anchored to the silica surface.

• AEROXIDE® TiO2 NKT 90

  AEROXIDE® TiO2 NKT 90 is a fine-particulate, fumed titanium dioxide (TiO2) that is highly hydrophobized with an organosilane.

• AEROXIDE® TiO2 P 25

  AEROXIDE® TiO2 P 25 is a fine-particulate, pure titanium dioxide (TiO2) with high specific surface area and marked aggregate and agglomerate structure. Because of its high purity, high specific surface area, and unique combination of anatase and rutile crystal structure, the product is suitable for many catalytic and photocatalytic applications. Its structure also makes it suitable for use as an effective UV filter.

• AEROXIDE® TiO2 P 90

  AEROXIDE® TiO2 P 90 is a highly dispersed titanium dioxide manufactured according to the AEROSIL® process.

• AEROXIDE® TiO2 PF 2

  AEROXIDE® TiO2 PF 2 is a unique fine particle mixed oxide consisting of titania and iron oxide, manufactured analogous to the AEROSIL® process. AEROXIDE® TiO2 PF 2 is an excellent heat stability in silicone rubber systems and certified according to BfR IV.

• AEROXIDE® TiO2 T 805

  AEROXIDE® TiO2 T 805 is a fine-particulate, fumed titanium dioxide (TiO2) that is highly hydrophobized with an organosilane.

• AEROSIL® 150 VS

  AEROSIL® 150 VS is a densified hydrophilic fumed silica with a specific surface area of 150 m2/g.

• AEROSIL® R 202

  AEROSIL® R 202 is a fumed silica after-treated with polydimethylsiloxane.

• AEROSIL® R 208

  AEROSIL® R 208 is a fumed silica after-treated with polydimethylsiloxane.

• AEROSIL® R 805

  AEROSIL® R 805 is a fumed silica after-treated with organosilane. It provides utmost transparency.

• AEROSIL® R 812

  AEROSIL® R 812 is a fumed silica after-treated with organosilane (HDMDS) with high specific surface and marked hydrophobia.

• AEROSIL® R 812 S

  AEROSIL® R 812 S is a fumed silica after-treated with HMDS.

• AEROSIL® R 816

  AEROSIL® R 816 is a fumed silica after-treated with hexadecylsilane.

• AEROSIL® R 972

  AEROSIL® R 972 is a fumed silica after-treated with DDS (dimethyldichlorosilane). It is easy to disperse and suitable for a broad range of applications.

• AEROSIL® R 972 V

  AEROSIL® R 972 V is a densified hydrophobic fumed silica, aftertreated with DDS (Dimethyldichlorosilane). Due to the densification it shows a weaker rheological effect than AEROSIL® R 972.

• AEROSIL® R 974

  AEROSIL® R 974 is a hydrophobic fumed silica after-treated with DDS (dimethyldichlorosilane).

• AEROXIDE® Alu C

  AEROXIDE® Alu C is a fine particle fumed aluminium oxide with high specific surface area and marked aggregate and agglomarate structure. The positive surface charge makes it ideal to control the electrostatic charge in powder coatings.

• AEROXIDE® Alu C 805

  AEROXIDE® Alu C 805 is a fine-particle fumed aluminium oxide, highly hydrophobized with an organosilane. Additional to ist free flow properties it protects against moisture.

• AgraLi®

  AgraLi – the low-chloride liquid fertilizer AgraLi is a low-chloride organic and mineral liquid NK fertilizer with Sulphur content (2-0-13-3) and cares for growing plants as a low-chloride potash fertilizer. The sulphurous organic and mineral liquid NK fertilizer is obtained during the production of methionine.

• AIRASE® 4500 Defoamer

  Organic oil defoamer

• AIRASE® 5100 Defoamer

  Strongest defoamer of the structured siloxane defomaer line (SSDL).

• AIRASE® 5500 Defoamer

  Formulated SSDL™ defoamer

• AIRASE® 8070 Defoamer

  Defoamer and de-aerator

• AIRASE® 4500

  AIRASE® 4500 is an effective defoamer concentrate based on organic polymer technology. Good balance of effectiveness and compatibility.

• AIRASE® 4655

  AIRASE® 4655 is a compatible defoamer concentrate based on organic polymer technology. Suitable for food contact compliant formulations.

• AIRASE® 5355

  AIRASE® 5355 is an effective defoamer concentrate based on polyether siloxane technology. Contains no fumed silica. Especially suitable for food contact compliant formulations.

• AIRASE® 5655

  AIRASE® 5655 is a very compatible defoamer concentrate based on polyether siloxane technology. Contains fumed silica. Suitable for food contact compliant formulations.

• AIRASE® 5700

  AIRASE® 5700 is a very compatible defoamer concentrate based on polyether siloxane technology. Contains fumed silica.

• AIRASE® 8070

  AIRASE® 8070 is an effective deaerator concentrate based on polyether siloxane technology. Very effective against micro-foam. Offers good compatibility.

• ALBIDUR® 1223

  ALBIDUR® 1223 shows the highest performance in flexibilizing SILIKOPON® EF and SILIKOPON® ED without influencing chemical resistance properties, gloss, or transparency of the cured film.

• ALBIDUR® PU 5640

  ALBIDUR® PU 5640 shows the highest performance in enhancing impact resistance without influencing chemical or corrosion resistance properties of pigmented 2-pack PUR coatings.

• ALBIDUR® EP 2240 A

  ALBIDUR® EP 2240 A is a white, 40 % concentrated dispersion of a high performance core-shell elastomer in an epoxy resin based on bisphenol A used to toughen brittle epoxies.

• ALBIDUR® PU 5640

  ALBIDUR® PU 5640 is a 40 % concentrate of a high performance elastomer in a short chain trifunctional polypropylene glycol. It is used to increase toughness of otherwise brittle PU systems.

• ALBIFLEX® 1166

  ALBIFLEX® 1166 is a novel aliphatic urethandiacrylate resin intended for formulating high-per-formance elastomers.

• ALBIFLEX® 246

  ALBIFLEX® 246 is a novel Bisphenol-A-epoxy-silicone block copolymer resin which is used to manufacture high-performance Elastomers.

• ALBIFLEX® 296

  ALBIFLEX® 296 is a bisphenol-A-epoxy-silicone block copolymer resin which is used to manufacture high-performance elastomers.

• ALBIFLEX® 348

  ALBIFLEX® 348 is a Bisphenol-A-epoxy-silicone block copolymer resin which is used to manufacture high-per-formance Elastomers.

• ALBIPOX® 1000

  ALBIPOX® 1000 is a high performance elastomer-modified epoxy resin based on Bisphenol A epoxy resin used to toughen brittle epoxy resins.

• ALBIPOX® 2000

  ALBIPOX® 2000 is a high performance elastomer-modified epoxy resin based on Bisphenol A epoxy resin used to toughen brittle epoxy resins.

• ALBIPOX® 2002

  ALBIPOX® 2002 is a high performance elastomer-modified epoxy resin based on Bisphenol F epoxy resin used to toughen brittle epoxy resins.

• ALBIPOX® 3001

  ALBIPOX® 3001 is a high performance elastomer-modified epoxy resin based on Bisphenol A/F epoxy resin used to toughen brittle epoxy resins.

• ALBIPOX® 8001

  ALBIPOX® 8001 is a high performance elastomer-modified epoxy resin based on Bisphenol A epoxy resin used as tackifier.

• ALBIPOX® F 080 and F 081

  ALBIPOX® F 080 and F 081 are high performance elastomer modified epoxy resins specially designed for composites with superior mechanical properties

• ALBIPOX® F 091

  ALBIPOX® F 091 is a high performance elastomer modified epoxy resins specially designed for composites with superior mechanical properties.

• Alkyl chloride 1012
• Alkyl chloride 1214
• AMICURE 101

  Amicure 101 curing agent for epoxy resins is a proprietary, non-MDA aromatic amine.

• AMICURE CG 1200

  Amicure CG-1200G curing agent is a micronized grade of dicyandiamide containing 0.5% of an inert flow control additive to inhibit clumping and improve handling.

• AMICURE CG325G

  Amicure CG-325G curing agent is a micronized grade of dicyandiamide containing 1.5% of an inert flow control additive to inhibit clumping and improve handling.

• AMICURE CGNA

  Amicure CG-NA curing agent is an unpulverized grade of dicyandiamide designed for use as a latent curing agent for epoxy resins in solventbased processes.

• AMICURE DBU-E

  Amicure DBU-E accelerator is a tertiary amine salt that functions as a cure accelerator for highperformance epoxy resin systems.

• AMICURE IC-20

  Amicure IC-20 is an amine curing agent specifically designed to cure with standard HDI Trimer or Biuret Isocyanates.

• AMICURE IC-221

  Amicure IC-221 is an amine curing agent specifically designed for polyisocyanate resins.

• AMICURE IC-321

  Amicure IC-321 is an amine curing agent specifically designed for polyisocyanate resins.

• AMICURE IC-322

  Amicure IC-322 curative is an amine curing agent specifically designed to cure with standard HDI Trimer or Biuret  socyanates for thin-film commercial and industrial flooring applications up to 20 mils.

• AMICURE IC-40

  Amicure IC-40 is an amine curing agent specifically designed to cure with standard HDI Trimer or Biuret Isocyanates.

• AMICURE PACM

  Amicure PACM curing agent is a liquid unmodified cycloaliphatic amine; bis-(p-aminocyclohexyl) methane.

• AMICURE UR

  Amicure UR cure accelerator is a substituted urea-based accelerator (1 Phenyl 3,3 dimethyl urea) for dicyandiamidecured epoxy resins.

• AMICURE UR 10/30

  Amicure UR10/30 cure accelerator, a ground version of Amicure UR accelerator; is a substituted urea-based accelerator (1 Phenyl 3,3 dimethyl urea) for dicyandiamidecured epoxy resins.

• AMICURE UR 7/10

  Amicure UR7/10 cure accelerator, a finely ground version of Amicure UR accelerator; is a substituted urea-based accelerator (1 Phenyl 3,3 dimethyl urea) for dicyandiamidecured epoxy resins.

• AMICURE UR2T

  Amicure UR2T cure accelerator is a substituted urea-based accelerator [1,1’-(4 methy-m-phenylene) bis(3,3 dimethyl urea)] for dicyandiamide-cured epoxy resins.

• AMICURE IC133/IC 166

  Amicure IC133 and IC166 curing agents are amine-based materials specifically designed to react with trimer isocyanates for high performance coating applications.

• Allyltriphenylphosphonium bromide
  • CAS name: Phosphonium, triphenyl-2-propenyl-, bromide
  • CAS number: 1560-54-9
  • Formula: C21H20BrP
  • Product Groups: Amino Acids for Pharma
  • Markets: Pharma & Healthcare
  • Code: TAL
  • Synonyms: Allyltriphenylphosphonium bromide
  Phosphonium, allyltriphenyl-, bromide 2-Propenyltriphenylphosphonium bromide Triphenyl(2-propenyl)phosphonium bromide Triphenylallylphosphonium bromide
  • Molecular weight: 383.27 g/mol
  • Related reactions: Phosphonium salts and phosphoranes
  Wittig Reactions   

• alpha-Keto-isoleucine calcium salt
  • Ketoacid for pharmaceutical applications (chronic renal failure)
  • CAS name: (S)-3-Methyl-2-oxo-pentanoic acid, calcium salt
  • CAS number: 66872-75-1
  • Formula: C12H18CaO6
  • Product Groups: Amino Acids for Pharma
  • Markets: Personal Care
  • Pharma & Healthcare
  • Applications: Anti-urolithic
  • Code: Keto-Ile
  • Synonyms: alpha-Keto-isoleucin Calciumsalz
  Isoleucine Ketoanalogue, Calcium Salt Calcium-3-methyl-2-oxo-valerate
  • Molecular weight: 298.4 g/mol 

• alpha-Keto-Leucine calcium salt
  • Ketoacid for pharmaceutical applications (chronic renal failure)
  • CAS name: 4-Methyl-2-oxo-pentanoic acid, calcium salt
  • CAS number: 51828-95-6
  • Formula: C12H18CaO6
  • Product Groups: Amino Acids for Pharma
  • Markets: Personal Care
  • Pharma & Healthcare
  • Applications: Anti-urolithic
  • Code: Keto-Leu
  • Synonyms: alpha-Keto-leucin Calciumsalz
  4-Methyl-2-oxopentanoic acid Calcium salt Ketoleucine Calcium salt alpha-Ketoisocaproic acid calcium salt Calcium alpha-ketoisocaproate Calcium alpha-oxoisocaproate Leucine Ketoanalogue, Calcium salt Calcium 4-methyl-2-oxovalerate Calcium ketoisocaproate
  • Molecular weight: 298.4 g/mol 

• alpha-Keto-phenylalanine calcium salt
  • Ketoacid for pharmaceutical applications (chronic renal failure)
  • CAS name: Benzenepropanoic acid, a-oxo-, calcium salt
  • CAS number: 51828-93-4
  • Formula: C18H14CaO6
  • Product Groups: Amino Acids for Pharma
  • Markets: Pharma & Healthcare
  • Applications: Anti-urolithic
  • Code: Keto-Phe
  • Synonyms: Phenylpyroracemic acid calcium salt
  Phenylalanine Ketoanalogue, Calcium salt Calcium-phenylpyruvate Calcium-2-oxo-3-phenylpropionate Phenylpyruvic acid calcium salt
  • Molecular weight: 366.4 g/mol
  • Related reactions: Amino acids from the chiral pool (Rexim) 
   

• alpha-Keto-valine calcium salt
  • Ketoacid for pharmaceutical applications (chronic renal failure)
  • CAS name: 3-Methyl-2-oxo-butanoic acid, calcium salt
  • CAS number: 51828-94-5
  • Formula: C10H14CaO6
  • Product Groups: Amino Acids for Pharma
  • Markets: Personal Care
  • Pharma & Healthcare
  • Applications: Anti-urolithic
  • Code: Keto-Val
  • Synonyms: alpha-Keto-valin Calciumsalz
  alpha-Ketoisovaleric acid calcium salt alpha-Ketovaline calcium salt Calcium alpha-ketoisovalerate Valine Ketoanalogue, Calcium salt Calcium-3-methyl-2-oxo-butyrate
  • Molecular weight: 270.3 g/mol

• alpha-Ketoglutaric acid
  • CAS name: Pentanedioic acid, 2-oxo-
  • CAS number: 328-50-7
  • Formula: C5H6O5
  • Product Groups: Amino Acids for Pharma
  Amino Acids for Pharma - Alpha Ketoglutaric Acid and Salts
  • Markets: Food, Feed & Beverages
  Personal Care Pharma & Healthcare
  • Code: AKG
  • Synonyms: 2-Oxoglutaric acid
  2-Oxopentanedioic acid alpha-Ketoglutarate
  • Molecular weight: 146.1 g/mol 

• AMINOBatch®

  In order to check whether the feed mixer is operating properly, supplemented amino acids are analyzed in 10 compound feed samples out of one batch of feed. Owing to the high analytical accuracy of amino acids AMINOBatch® allows for a realistic evaluation of mixing quality. The AMINOBatch® test helps to produce more homogeneous compound feeds, supporting uniform and consistent animal performance.

• AMINOBatch®WPT

  AMINOBatch® Working Precision Test is a unique tool to get comprehensive data for the working precision of the dosing and mixing lines for all amino acids in the process in one single test. It is the only working precision test providing results for the application of dry and liquid additives in the same mixing line under comparative conditions.

• AMINOChick® 2.0

  AMINOChick®2.0 is an interactive software predicting optimum digestible amino acid contents in broiler feed based on input variables set by the user. Building on and replacing QuickChick 1.0, it employs a completely revised set of scientific data and includes an additional feature which allows users to calculate optimum dietary amino acid contents based on the methionine source, its supplementation rate and the relative bioavailability value they use.

• AMINODat®

  AMINODat® comprises the results of more than 28,000 complete amino acid analyzes of feed ingredients from all over the world. It provides amino acid profiles, respective regression equations and amino acid recommendations for different species. This database is constantly updated, covers 130 feedstuffs and is the perfect tool to optimize feed formulation.

• AMINOHen®

  Based on the input factors dietary energy and feed intake AMINOHen® predicts optimum digestible amino acid intakes and concentrations in feed for different laying periods with the aim to optimize egg mass and feed conversion. Similar to AMINOChick® 2.0, it also features a function for calculating optimum dietary amino acid contents based on the methionine source, its supplementation rate and the relative bioavailability value which the user applies.

• AMINOLab®

  AMINOLab® is the most reliable analytical service for amino acids in raw materials and compound feeds from the largest amino acid laboratory in the world. AMINOLab® analytics is a powerful tool for raw material evaluation and selection and thus helps purchasers to make the right decisions. Supporting accurate least cost feed formulation and quality control in feed and livestock production are on the list of advantages for nutritionists, quality control and livestock production managers using AMINOLab® results. The amino acid variability in key ingredients can be reduced and thus amino acid specs in complete feeds need lower safety margins.

• AMINONEC™

  AMINONEC™ is a software calculating the Net Energy content of feed materials based on chemical analysis of the ingredients (INRA, 2004) using regression equations (Noblet al., 2004).

• AMINONews®

    AMINONews® is our regular information on nutritional topics for the feed industry, integrated livestock and poultry operations, consultants and universities. AMINONews® aims at translating scientific data and experience into practical solutions for our customers. Each publication supports your decisions within your operations.

• AMINONIR®

  Near-Infrared Reflectance Spectroscopy (NIRS) has been used for feedstuff analysis for many years. Evonik has developed specific calibrations for the prediction of crude protein and essential amino acids for all major feed ingredients, both on total and standardized ileal digestible bases. The basis of AMINONIR® is a large and diverse set of samples of global origin. The advantages of AMINONIR® are easy sample preparation, speed and low operating costs. AMINONIR® is simple to operate and no chemicals have to be used for the procedure. AMINONIR® offers the opportunity to do extensive raw material screening programs at moderate cost.

• AMINOPig®
• AMINOQ®

  AMINOQ® is an application for the graphic display and statistical evaluation of analytical data. A multitude of functions including data filtering, visualization and automatic calculation of basic statistic key indicators allows users to evaluate and compare ingredients for better informed decisions in purchasing and feed formulation.

• AMINORED®

  AMINORED® provides a Rapid Evaluation of Digestibility in heat processed feed ingredients. For improved feed quality. For smaller safety margins. For more efficient feed usage and real cost savings. AMINORED® - the quality check for your raw ingredients.

• AMINOSys®

  AMINOSys® comprises consulting, hardware and software solutions for micro-ingredient handling and dosing in feed mills. The AMINOSys® range of equipments offers flexible solutions for fully automated direct dosing or for conveying from bulk silos to existing micro-ingredient systems. Comprehensive engineering and commissioning support ensures maximized benefit for the feed mill.

• AMINOVAR™

  AMINOVAR™ is a software tool which helps to identify the most variable feed ingredients in your operation and shows the effect those have on the overall variation of amino acid contents in a user defined diet. AMINOVAR™ supports nutritionists and formulators in quality management of feed ingredients and illustrates the impact ingredient variation has on nutrient safety margins.

• Aminoxid LE

  High foaming surfactant of the Lauramine oxide type

• Aminoxid LO

  High foaming surfactant of the Lauramine oxide type

• ANCAMIDE 2137

  Ancamide 2137 curing agent is an amidoamine designed for use with liquid epoxy resins in the formulation of high-solids, low-VOC coatings.

• ANCAMIDE 220IPA73

  Ancamide 220 curing agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins.

• ANCAMIDE 221

  Ancamide 221 curative is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications.

• ANCAMIDE 2396

  Ancamide 2396 curing agent is a modified amidoamine intended for use at ambient temperature with liquid epoxy resins.

• ANCAMIDE 2424

  Ancamide 2424 curing agent is a high performance, modified polyamide optimized for use with liquid epoxy resins in twocomponent structural adhesives.

• ANCAMIDE 2426

  Ancamide 2426 curing agent is a modified, low-viscosity, blush-resistant amidoamine curing agent for use in coatings, civil engineering and adhesive applications.

• ANCAMIDE 2443

  Ancamide 2443 curing agent is a modified amidoamine designed to be used with liquid epoxy resins.

• ANCAMIDE 2445

  Ancamide 2445 curing agent is a modified polyamide designed to be used with liquid epoxy resin.

• ANCAMIDE 260A

  Ancamide 260A curing agent is one in a series of standard reactive liquid polyamides developed specifically for use in the curing of epoxy resins.

• ANCAMIDE 2634

  Ancamide 2634 is a modified polyamide curing agent designed for use in two component solvent borne epoxy coatings where high performance and cost effectiveness are key requirements.

• ANCAMIDE 2652

  Ancamide 2652 curing agent is a special polyamide adduct designed for use with liquid epoxy resins in two-part, ambient-cure coatings specifically developed to provide long overcoatability with epoxy and alternative resin technology.

• ANCAMIDE 2739

  Ancamide 2739 curing agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10°C).

• ANCAMIDE 2767

  Ancamide 2767 curing agent is a high performance modified polyamide intended for use with epoxy resins in two-part ambient cure coatings.

• ANCAMIDE 2769

  Ancamide 2769 curing agent is an innovative technology designed for use with liquid epoxy resin.

• ANCAMIDE 2798

  Ancamide 2798 curing agent is a modified aliphatic amidoamine curing agent designed for use with liquid epoxy resin.

• ANCAMIDE 3202

  Ancamide 3202 curing agent is a low viscosity, formulated polyaminoamide adduct supplied at 90% solids in ethanol.

• ANCAMIDE 3419

  Ancamide 3419 curing agent is a low viscosity amidoamine hardener.

• ANCAMIDE 350A

  Ancamide 350A curing agent is one in a series of standard reactive liquid polyamides for use in the curing of epoxy resins.

• ANCAMIDE 375A

  Ancamide 375A curing agent is one in a series of standard reactive polyamides designed for use in the curing of epoxy resins.

• ANCAMIDE 400

  Ancamide 400 curing agent is a unique, low viscosity reactive polyamide developed specifically for use in the curing of liquid epoxy resins.

• ANCAMIDE 501

  Ancamide 501 curing agent is an accelerated amidoamine for use in curing liquid epoxy resins.

• ANCAMIDE 502

  Ancamide 502 and Ancamide 506 curing agents are amidoamines designed for curing liquid epoxy resins at ambient or elevated temperatures.

• ANCAMIDE 503

  Ancamide 503 curing agent is an aliphatic amidoamine curing agent designed for use with liquid epoxy resin.

• ANCAMIDE 506

  Ancamide 502 and Ancamide 506 curing agents are amidoamines designed for curing liquid epoxy resins at ambient or elevated temperatures.

• ANCAMIDE 512

  Ancamide 512 is an aliphatic amidoamine curing agent designed for use with liquid epoxy resin at ambient or elevated temperatures.

• ANCAMIDE 700-B-75

  Ancamide 700-B-75 curing agent is a polyamide/epoxy adduct adjusted to 75% solids by weight in n-butanol.

• ANCAMIDE 801

  Ancamide 801 curing agent is a highperformance polyamide designed for use with standard epoxy resins.

• ANCAMIDE 805

  Ancamide 805 curing agent is the lowest viscosity variant in the 800-series of polyamide curing agents.

• ANCAMIDE 910

  Ancamide 910 curing agent is a versatile, flexible hardener designed for use with liquid epoxy resin.

• ANCAMINE 702-B75

  Ancamide 702-B75 curing agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications.

• ANCAMIDE 2050

  Ancamide 2050 curing agent is a special polyamide adduct designed for use with liquid epoxy resins in two-part, ambient-cure coatings.

• ANCAMIDE 220

  Ancamide 220 curing agent is one in a series of standard reactive polyamides for use in the curing of epoxy resins.

• ANCAMIDE 2353

  Ancamide 2353 curing agent is a high-performance modified polyamide intended for use with epoxy resins in two-part ambient cure coatings.

• ANCAMIDE 261A

  Ancamide 261A curing agent is a reactive polyamide developed for use in curing epoxy resins in coatings and adhesives applications. Special features include good color, color stability, excellent corrosion resistance and good adhesion properties.

• ANCAMIDE 2781

  Ancamide 2781 curing agent is a versatile, low viscosity hardener designed to cure liquid epoxy resin at elevated temperatures.

• ANCAMIDE 3201

  Ancamide 3201 curing agent is a low viscosity, solvent-free formulated polyaminoamide adduct.

• ANCAMIDE 3507

  Ancamide 3507 Curing agent is a polyamide adduct developed for use with epoxy resins in solvent-based surface coatings applications.

• ANCAMIDE 351A

  Ancamide 351A curing agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in coatings and adhesives applications.

• ANCAMIDE 3622

  Ancamide 3622 curing agent is a polyaminoamide adduct supplied in xylene/n-butanol (1:1).

• ANCAMIDE 1691

  Ancamide 1691 is an epoxy adduct of the standard polyamide curing agent, Ancamide 220, supplied as a 60% solids by weight solution in xylene/butanol (4/1 by weight).

• ANCAMIDE 221-X70

  Ancamide 221-X70 curing agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications.

• Ancamide 2386

  Ancamide 2386 curing agent is a low viscosity modified amidoamine intended for use at ambient and low temperatures with liquid epoxy resins.

• Ancamide 2573

  Ancamide 2573 curing agent is a modified polyamide adduct, intended for use as an ambient curing agent for liquid epoxy resin.

• Ancamide 3009

  Ancamide 3009 curing agent is a polyamide in xylene/methoxypropanol (4:1).

• Ancamide 3011

  Ancamide 3011 curing agent is a high viscosity polyamide. The curing agent can be used in combination with solid epoxy resin solutions in the formulation of high performance corrosion resistant coatings.

• Ancamide 3013

  Ancamide 3013 curing agent is a polyamide in solvent. Is recommended for solvent-based coatings.

• Ancamide 3015

  Ancamide 3015 curing agent is a high viscosity polyamide solution cut in xylene.

• Ancamide 3021

  Ancamide 3021 curing agent is a medium viscosity polyamide. It is recommended for use with liquid epoxy resin for the formulation of two component adhesives, coatings and trowelable mortars.  

• Ancamide 3023

  Ancamide 3023 curing agent is a low viscosity polyamide supplied at 70% solids in solvent (xylene).

• Ancamide 3029

  Ancamide 3029 curing agent is a polyamide. It is recommended for reactive adhesives, casting resins and for heat resistant epoxy mortars.

• Ancamide 3030

  Ancamide 3030 curing agent is a reactive polyaminoamide developed for use primarily but not exclusively with liquid epoxy resins.

• Ancamide 3031

  Ancamide 3031 curing agent is a medium viscosity polyamide. Ancamide 3031 curing agent is recommended for coatings, filling compounds, epoxy mortars, adhesives and molding compounds.

• Ancamide 3032

  Ancamide 3032 curing agent is a low viscosity polyaminoamide.

• Ancamide 3033

  Ancamide 3033 curing agent is a low viscosity amidoamine.

• Ancamide 3034

  Ancamide 3034 curing agent is a moderate viscosity amidoamine.

• Ancamide 3112

  Ancamide 3112 curing agent is a modified polyamide adduct supplied at 62% solids in xylene and n-butanol.

• Ancamide 3155

  Ancamide 3155 curing agent is a modified solvent free polyaminoamide adduct hardener.

• Ancamide 3178

  Ancamide 3178 curing agent is a polyamide adduct supplied at 75% solids in xylene.

• Ancamide 3200

  Ancamide 3200 curing agent is a low viscosity, solvent-free formulated polyaminoamide adduct.

• Ancamide 3216

  Ancamide 3216 curing agent is a polyaminoamide in xylene.

• Ancamide 3301

  Ancamide 3301 curing agent is a polyaminoamide adduct hardener.

• Ancamide 3398

  Ancamide 3398 curing agent is polyaminoamide adduct at 60% solids.

• Ancamide 3399

  Ancamide 3399 curing agent is a low viscosity modified polyaminoamide hardener.

• Ancamide 3479

  Ancamide 3479 curing agent is a polyaminoamide hardener supplied in xylene.

• Ancamide 3480

  Ancamide 3480 curing agent is an accelerated polyaminoamide adduct.

• Ancamide 3524

  Ancamide 3524 curing agent is a polyaminoamide supplied in xylene/iso-butanol (1:1 solvent).

• Ancamide 3529

  Ancamide 3529 curing agent is a low viscosity amidoamine hardener.

• Ancamide 3537

  Ancamide 3537 curing agent is an accelerated polyamide adduct supplied in a 4:1 xylene/butanol blend.

• Ancamide 3623

  Ancamide 3623 curing agent is a low viscosity polyamide cut in xylene/butanol (4:1).

• Ancamide 3624

  Ancamide 3624 curing agent is a polyamide adduct supplied in xylene/n-butanol (4:1).

• Ancamide 500

  Ancamide 500 is an aliphatic amidoamine curing agent designed for use with liquid epoxy resin.

• Ancamide 903MAV

  Ancamide 903MAV is an amidoamine designed for use with liquid epoxy resin in the formulation of intumescent coatings.

• Ancamide® 2832

   Ancamide® 2832 is a modified polyamide curing agent developed to provide rapid through cure and long overcoatability with epoxy resins. It can be used in high solids maintenance and OEM coatings.

• ANCAMINE 2900

  Ancamine 2900 curing agent is an aromatic amine designed for curing liquid epoxy resins at elevated temperatures.

• ANCAMINE AEP

  Ancamine AEP curing agent is a 96% minimum purity grade of N-aminoethyl-piperazine, designed for use as a curing agent for liquid epoxy resins.

• ANCAMINE 1110

  Ancamine 1110 curing agent is a technical grade of dimethylaminomethylphenol.

• ANCAMINE 1482

  Ancamine 1482 curing agent is a liquid eutectic mixture of aromatic amines designed to cure liquid epoxy resins.

• ANCAMINE 1618

  Ancamine 1618 curing agent is a low color, low viscosity modified cycloaliphatic amine intended for ambient or low temperature curing of liquid epoxy resins.

• ANCAMINE 1637-LV

  Ancamine® 1637-LV is a low viscosity version of Ancamine 1637.

• ANCAMINE 1638

  Ancamine® 1638 curing agent is a modified aliphatic amine designed for use with liquid epoxy resin cured at ambient or elevated temperature.

• ANCAMINE 1767

  Ancamine 1767 curing agent is a modified aliphatic amine used to cure liquid epoxy resins at ambient or low temperatures.

• ANCAMINE 1768

  Ancamine 1768 curing agent is a rapid ambient or low temperature curing agent for epoxy resins.

• ANCAMINE 1784

  Ancamine 1784 curing agent is a room temperature, lowviscosity modified aliphatic amine hardener for epoxy resins.

• ANCAMINE 1856

  Ancamine 1856 curing agent is a modified aliphatic amine with high reactivity.

• ANCAMINE 1884

  Ancamine 1884 curing agent is a formulated cycloaliphatic amine hardener for liquid epoxy resins.

• ANCAMINE 1895

  Ancamine 1895 curing agent is a low-color, moderateviscosity cycloaliphatic amine adduct.

• ANCAMINE 1916

  Ancamine 1916 curing agent is an aliphatic amine adduct intended for use with liquid epoxy resins at room or elevated temperature cure.

• ANCAMINE 1922A

  Ancamine 1922A curing agent is a low viscosity, moderately reactive room temperature curing agent for epoxy resins.

• ANCAMINE 1934

  Ancamine 1934 is a modified cycloaliphatic polyamine adduct intended for use with liquid epoxy resin.

• ANCAMINE 2014AS/FG

  Ancamine 2014AS and 2014FG curing agents are modified polyamines that have been designed as latent curing agents.

• ANCAMINE 2014FG

  Ancamine 2014AS and 2014FG curing agents are modified polyamines that have been designed as latent curing agents.

• ANCAMINE 2074

  Ancamine 2074 curing agent is a modified cycloaliphatic amine.

• ANCAMINE 2089M

  Ancamine 2089M curing agent is a modified aliphatic amine for use as an ambient temperature curing agent for liquid epoxy resins.

• ANCAMINE 2205

  Ancamine 2205 curing agent is an accelerated modified aliphatic amine curative intended for use with liquid epoxy resins in two-part ambient or low-temperature cure systems.

• ANCAMINE 2264

  Ancamine 2264 is an epoxy curing agent with both cycloaliphatic and aromatic character.

• ANCAMINE 2280

  Ancamine 2280 curing agent is a low-viscosity modified cycloaliphatic amine designed for use with liquid epoxy resins in two-package formulations.

• ANCAMINE 2337S

  Ancamine 2337S curing agent is a modified aliphatic amine designed for use as a latent curing agent for epoxy resins.

• ANCAMINE 2390

  Ancamine 2390 curing agent is a low viscosity modified amine designed to be used with liquid epoxy resin.

• ANCAMINE 2410

  Ancamine 2410 curing agent is a highly monodispersed adduct of ethylene diamine (EDA) designed for use in coatings and related applications.

• ANCAMINE 2422

  Ancamine 2422 curing agent is a highfunctionality aliphatic amine designed for use in two-package epoxy formulations.

• ANCAMINE 2432

  Ancamine 2432 curing agent is a modified aliphatic amine intended for use with liquid epoxy resins.

• ANCAMINE 2441

  Ancamine 2441 curing agent is a modified polyamine which was designed for use as a latent curing agent for onecomponent adhesive formulations.

• ANCAMINE 2442

  Ancamine 2442 curing agent is a modified polyamine designed for use as a latent curing agent for one-component epoxy formulations.

• ANCAMINE 2458

  Ancamine 2458 curing agent is a low-viscosity ketimine curing agent recommended for low volatile organic compound (VOC) coatings.

• ANCAMINE 2481

  Ancamine 2481 curing agent is a modified aliphatic amine intended for use with liquid epoxy resins.

• ANCAMINE 2489

  Ancamine 2489 curing agent is a low-color cycloaliphatic amine adduct intended for use with liquid epoxy resins.

• ANCAMINE 2557

  Ancamine 2557 curing agent is a slightly lower viscosity version of Ancamine 1769 curing agent.

• ANCAMINE 2579

  Ancamine 2579 curing agent is a low-viscosity modified cycloaliphatic amine designed for use with liquid epoxy resins in two-package formulations.

• ANCAMINE 2605

  Ancamine 2605 curing agent is a modified cycloaliphatic polyamine intended for use as a room temperature curing agent for liquid epoxy resin.

• ANCAMINE 2641

  Ancamine 2641 curing agent is an accelerated modified aliphatic amine curative intended for use with liquid epoxy resins in two-part ambient or low-temperature cure systems.

• ANCAMINE 2683

  Ancamine 2683 curing agent is a cycloaliphatic amine which exhibits low viscosity and a high glass transition temperature within liquid epoxy resin systems.

• ANCAMINE 2686

  Ancamine 2686 curing agent is a modified cycloaliphatic polyamine intended for use as a room temperature curing agent for liquid epoxy resin.

• ANCAMINE 2726

  Ancamine 2726 curing agent is a modified cycloaliphatic amine adduct intended for use at ambient temperatures with liquid epoxy resins.

• ANCAMINE 2749

  Ancamine 2749 is a cycloaliphatic amine adduct curing agent designed for use with liquid epoxy resins.

• ANCAMINE 2785

  Ancamine 2785 curing agent is an accelerated modified aliphatic amine curative intended for use with liquid epoxy resins in two-part ambient cure systems.

• ANCAMINE 2800

  Ancamine 2800 is a modified polyamine intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application.

• ANCAMINE 2803

  Ancamine 2803 is a modified polyamine curing agent intended for fast cure, high elongation and hardness epoxy application.

• ANCAMINE 2811

  Ancamine 2811 is a phenalkamine based modified amine curing agent.

• ANCAMINE 2830

  Ancamide 2830 curing agent is a low viscosity modified polyamide amine curative that does not require an induction time.

• ANCAMINE 3456

  Ancamine 3456 curing agent is a formulated aliphatic polyamine adduct designed for use with liquid epoxy resin at ambient temperature.

• ANCAMINE K54

  Ancamine K54 curing agent is a technical grade of tris- (dimethylaminomethyl) phenol—a versatile Lewis Base catalyst for curing epoxy resins.

• ANCAMINE K61B

  Ancamine K61B curing agent is tris-(dimethylaminomethyl) phenol tri (2-ethyl hexoate).

• ANCAMINE MCA

  Ancamine MCA curing agent is a modified cycloaliphatic amine designed for use with liquid epoxy resins.

• ANCAMINE T

  Ancamine T is a technical grade of N-(2-hydroxyethyl) diethylene triamine for use as a room temperature curing agent for liquid epoxy resin.

• ANCAMINE TETA

  Ancamine TETA curing agent is a standard commercial grade of triethylenetetramine.

• ANCAMINE Z

  Ancamine Z curing agent is a liquid aromatic amine eutectic designed for curing liquid epoxy resins at elevated temperatures.

• ANCAMINE 2910

  Ancamine 2910 curing agent is a versatile, low viscosity hardener designed to cure liquid epoxy resin at elevated temperature.

• ANCAMINE AD

  Ancamine AD curing agent gives very rapid cure at ambient and low temperatures.

• ANCAMINE 1608

  Ancamine 1608 is a modified aliphatic polyamine adduct curing agent designed for use as an ambient temperature curing agent for epoxy resin.

• ANCAMINE 1693

  Ancamine 1693 curing agent is a very lowviscosity modified cycloaliphatic amine designed as an ambient-temperature curative for liquid epoxy resins.

• ANCAMINE 1769

  Ancamine 1769 curing agent is a hydroxyalkylated polyamine for use in the ambient or elevated-temperature cure of liquid epoxy resins.

• ANCAMINE 2049

  Ancamine 2049 curing agent is an unmodified cycloaliphatic amine used to cure epoxy resins at elevated temperatures.

• ANCAMINE 2071

  Ancamine 2071 curing agent is a rapid-setting, phenol-free aliphatic polyamine.

• ANCAMINE 2072

  Ancamine 2072 curing agent is a phenol-free, Mannich-Base cycloaliphatic amine intended for use with liquid epoxy resins.

• ANCAMINE 2143

  Ancamine 2143 curing agent is a low-color, low-viscosity cycloaliphatic amine adduct intended for use with liquid epoxy resins.

• ANCAMINE 2286

  Ancamine 2286 is a very low viscosity modified cycloaliphatic amine curing agent intended for ambient or low temperature cure of liquid epoxy resins.

• ANCAMINE 2368

  Ancamine 2368 curing agent is a low-color, lowviscosity cycloaliphatic amine adduct intended for use with liquid epoxy resins.

• ANCAMINE 2410B75

  Ancamine 2410B75 curing agent is a 75% solids, highly monodispersed adduct of a polyamine and liquid epoxy resin cut in butanol and is designed for use in coatings and related applications.

• ANCAMINE 2423

  Ancamine 2423 curing agent is a low-color cycloaliphatic amine adduct intended for use with liquid epoxy resins.

• ANCAMINE 2450

  Ancamine 2450 epoxy curing agent is a cycloaliphatic amine blend which exhibits low viscosity with good transition temperature and is a low cost alternative to other cycloaliphatics for composite applications.

• ANCAMINE 2519

  Ancamine 2519 is a modified cycloaliphatic polyamine intended for use as an ambient curing agent for liquid epoxy resin.

• ANCAMINE 2659

  Ancamine 2659 curing agent is a low color, low viscosity modified cycloaliphatic amine intended for ambient or low temperature curing of liquid epoxy resins.

• ANCAMINE 2672

  Ancamine 2672 curing agent is a modified cycloaliphatic amine designed for use as a room temperature curing agent for liquid epoxy resin.

• ANCAMINE 2709

  Ancamine 2709 is a tertiary amine based cure accelerator for dicyandiamide and anhydride cured epoxy resin systems.

• ANCAMINE 2712M

  Ancamine 2712M curing agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10°C).

• ANCAMINE 2748

  Ancamine 2748 curing agent is a modified cycloaliphatic amine designed for use with liquid epoxy resins in the formulation of two component epoxy coatings.

• ANCAMINE 2791

  Ancamine 2791 curing agent is a low-viscosity curing agent designed for high temperature epoxy systems.

• ANCAMINE 2903

  Ancamine 2903 curing agent is designed for curing liquid epoxy resins at elevated temperatures to provide high thermal and chemical properties.

• ANCAMINE DETA

  Ancamine DETA curing agent is a 98.5% minimum purity grade of diethylenetriamine.

• ANCAMINE DL50

  Ancamine DL50 curing agent is a liquid mixture of aromatic amines based on methylenedianiline (MDA).

• ANCAMINE TEPA

  Ancamine TEPA curing agent is a standard commercial grade of tetraethylene pentamine.

• ANCAMINE Y

  Ancamine Y curing agent is an aromatic amine designed for curing liquid epoxy resins at elevated temperatures.

• Ancamine 149

  Ancamine 149 is a modified cycloaliphatic polyamine adduct intended for use as a room temperature curing agent for liquid epoxy resin.

• Ancamine 156

  Ancamine 156 is a modified cycloaliphatic polyamine intended for use as room temperature curing agent for liquid epoxy resin.

• Ancamine 1693 HV

  Ancamine 1693HV is a modified cycloaliphatic polyamine adduct designed for use as an ambient temperature curing agent for epoxy resin.

• Ancamine 2165

  Ancamine 2165 is a low viscosity accelerated aliphatic amine developed specifically for crack-injection applications at both room temperature and lower temperatures down to 5˚C.

• Ancamine 2167

  Ancamine 2167 and 2264 epoxy curing agents exhibit some of the beneficial properties of both cycloaliphatic and aromatic amines. These curing agents are an ideal alternative to aromatic diamines in the elevated temperature cure of epoxy resins.

• Ancamine 2196

  Ancamine 2196 is a modified cycloaliphatic polyamine designed for use with liquid epoxy resin.

• Ancamine 2199

  Ancamine 2199 curing agent is a modified cycloaliphatic polyamine adduct intended as an ambient temperature curing agent for liquid epoxy resin.

• Ancamine 2320

  Ancamine 2320 is a modified cycloaliphatic polyamine intended for use as an ambient curing agent for liquid epoxy resin.

• Ancamine 2379

  Ancamine 2379 is a modified cycloaliphatic adduct designed for use with liquid epoxy resin at ambient temperatures.

• Ancamine 2405

  Ancamine 2405 is an epoxy curing agent, based on a polycyclic polyamine, developed specifically for use at low temperatures (5-10°C) to complement the room temperature curing agent Ancamine 2280.

• Ancamine 2407

  Ancamine 2407 curing agent is polyamine adduct based on Bisphenol F diglycidyl ether.

• Ancamine 2500

  Ancamine 2500 is an aliphatic amine based curing agent particularly suited to low temperature conditions.

• Ancamine 2512

  Ancamine 2512 is a modified cycloaliphatic polyamine intended for use as a room temperature curing agent for liquid epoxy resin.

• Ancamine 2514

  Ancamine 2514 is a modified cycloaliphatic polyamine intended for use as room temperature curing agent for liquid epoxy resin.

• Ancamine 2578

  Ancamine 2578 curing agent is a modified aliphatic polyamine adduct intended for use as a low temperature curing agent for liquid epoxy resin.

• Ancamine 2608

  Ancamine 2608 is a modified cycloaliphatic polyamine intended for use as an ambient curing agent for liquid epoxy resin.

• Ancamine 2609

  Ancamine 2609 curing agent is a nonyl phenol free aliphatic polyamine Mannich base curing agent designed for use with liquid epoxy resin.

• Ancamine 2609W

  Ancamine 2609W curing agent is a nonyl phenol free aliphatic polyamine Mannich base curing agent designed for use with liquid epoxy resin.

• Ancamine 2646M

  Ancamine 2646M curing agent is a modified cycloaliphatic polyamine intended for use as a room temperature curing agent for liquid epoxy resin.

• Ancamine 2654

  Ancamine 2654 is an modified aliphatic polyamine intended for use as a curing agent with liquid epoxy resin.

• Ancamine 2678

  Ancamine 2678 curing agent is designed for use as a curing agent for liquid epoxy resins with similar performance to AEP in most applications.

• Ancamine 2685

  Ancamine 2685 curing agent is a modified cycloaliphatic polyamine intended for use as an ambient curing agent for liquid epoxy resin.

• Ancamine 2692

  Ancamine 2692 curing agent is a modified cycloaliphatic polyamine intended for use as a room temperature curing agent for liquid epoxy resin.

• Ancamine 2693M

  Ancamine 2693M curing agent is a modified cycloaliphatic polyamine intended for use as a room temperature curing agent for liquid epoxy resin.

• Ancamine 2695

  Ancamine 2695 Curing Agent is a modified cycloaliphatic curing agent designed for use with liquid epoxy resin.

• Ancamine 2704

  Ancamine 2704 Curing Agent is a modified cycloaliphatic amine designed for use with standard liquid epoxy resin for ambient cure applications.

• Ancamine 2719

  Ancamine 2719 curing agent is a nonyl- and p-tert-butyl phenol free aliphatic polyamine Mannich base curing agent designed for use with liquid epoxy resin.

• Ancamine 2728

  Ancamine 2728 curing agent is a modified aliphatic polyamine adduct intended for use as a low temperature curing agent for liquid epoxy resin.

• Ancamine 2734

   Ancamine 2734 curing agent is a mannich base adduct intended for use with liquid epoxy resin.

• Ancamine 2739

   Ancamine 2739 curing agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10°C).

• Ancamine 2760

   Ancamine 2760 curing agent is a modified cycloaliphatic amine adduct specifically designed as an ambient temperature curing agent for liquid epoxy resin.

• Ancamine 2764

   Ancamine® 2764 is a low color, low viscosity, modified cycloaliphatic amine curing agent intended for use with liquid epoxy resin cured at ambient temperature.

• Ancamine 2768

  Ancamine 2768 curing agent is a modified cycloaliphatic polyamine intended for use as a room temperature curing agent for liquid epoxy resin.

• Ancamine 2802

   Ancamine 2802 curing agent is a modified polyamine intended for use as a curing agent for diluted liquid epoxy resin at ambient temperature application.

• Ancamine 2806

   Ancamine 2806 curing agent is a low viscosity modified aliphatic amine curing agent intended for use with liquid epoxy resin at ambient temperature applications.

• Ancamine 2914UF

  Ancamine® 2914UF is an epoxy curing agent designed to achieve an ultra-fast cure speed at room temperature in adhesive applications.

• Ancamine 3135

  Ancamine 3135 curing agent is a high reactive aliphatic polyamine designed for use as an accelerator or sole curative with liquid epoxy resin in mortar and adhesive applications.

• Ancamine 3137

  Ancamine 3137 curing agent is a modified cycloaliphatic polyamine intended for use as an ambient curing agent for liquid epoxy resin.

• Ancamine 3140

  Ancamine 3140 curing agent is a nonyl phenol free aliphatic polyamine Mannich base curing agent designed for use with liquid epoxy resin.

• Ancamine 3142

  Ancamine 3142 curing agent is a modified cycloaliphatic polyamine curing agent for use with liquid epoxy resin. Ancamine 3142 curing agent provides a long potlife in combination with fast cure speed.

• ANCAMINE® 3213

  Ancamine 3213 curing agent is a nonyl phenol free, modified cycloaliphatic polyamine intended for use as an ambient curing agent for liquid epoxy resin.

• ANCAREZ AR555

  Ancarez AR555 resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water.

• ANCATHERM 592

  Ancatherm 592 thermoplastic polyamide is a hot melt resin that can be used in the printing ink, gravure ink for the flexible packaging industry.

• ANQUAMINE 287

  Anquamine 287 curing agent is a novel water-based epoxy curing agent designed for use in two part epoxy systems with standard liquid and modified liquid epoxy resins without the addition of emulsifiers.

• ANQUAMINE 360 / EPILINK 360

  Anquamine 360 / Epilink 360 curing agent is a modified polyamide curing agent designed for use with liquid epoxy resins in two-component, ambient-cure, waterborne epoxy coatings.

• ANQUAMINE 401

  Anquamine 401 waterborne curing agent is a modified aliphatic amine supplied at 70% solids in water.

• ANQUAMINE 419

  Anquamine 419 waterborne curing agent is a modified aliphatic amine supplied at 60% solids in water and methoxy propanol.

• ANQUAMINE 721

  Anquamine 721 waterborne curing agent is a modified amine curing agent designed for use in waterborne epoxy coatings where cost effectiveness and high performance are key requirements.

• ANQUAWHITE 735

  Anquamine 735 curing agent is a water-based curing agent specifically designed for standard liquid epoxy resin.

• ANQUAMINE 701 / EPILINK 701

  Anquamine 701 /Epilink 701 is a water-based epoxy curing agent that lets you create unique microporous systems that are breathable and water vapor permeable preventing delamination and blistering.

• Anquamine 728

  Anquamine 728 waterborne curing agent is a multi-purpose curing agent for use in concrete primers and topcoats, and delivers fast cure speed at low temperature (10˚C) and high humidity (up to 85% RH).

• ANQUAWHITE 100

  Anquawhite 100 curing agent is a novel waterborne curing agent dispersion designed for use in ambient or heat cure two part epoxy systems.

• ANTIL® 120 Plus MB

  Sugar-based thickening agent for aqueous surfactant systems. Suitable for many formulations such as hair shampoos, shower gels, foam baths, liqiud soaps or hand wash pastes

• ANTIL® 127 MB

  Liquid,sugar-based rheological additive for aqueous surfactant systems.It is suitable for many formulations such as hair shampoos, shower gels, foam baths, liqiud soaps or hand wash pastes.

• ANTIL® 141 liquid

  Rheological additive for aqueous surfactant systems. Good thickening properties in common surfactant systems.

• ANTIL® 171

  Rheological additive for aqueous surfactant systems. Cold processable in every step of the production, highly effective. Acts as a solubilizer and improves foam.

• ANTIL® 200 MB

  Very effective thickening agent. Vegetable based.Mild additive recommended for baby products and for other mild hair and skin cleansing formulations for delicate skin. Refatting properties

• ANTIL® HS 60 MB

  PEG-free refatting agent with good thickening properties, providing a pleasant skin feel in skin cleansing products.Contributes to improved rheology and gel strength of W/Si emulsions.

• ANTIL® Soft SC MB

  ANTIL® Soft SC MB is a multifunctional natural based additive for surfactant formulas with excellent thickening and foam boosting properties, also in PEG-free systems. It improves foam creaminess and skin feel.

• ANTIL® SPA 80

  Efficient PEG-free thickening and conditioning agent for skin and hair cleansing formulations. Excellent viscosity builder, even for PEG-free systems. Provides temperature stable viscosities. Liquid monoalkanolamide (no secondary amines).  

• ANTIL® 500 Pellets

  As an innovative hydrophilic polymer, ANTIL® 500 Pellets enables a significant reduction of the active surfactant level in standard cleansing formulations. In addition, the extraordinary efficiency and high flexibility of ANTIL® 500 Pellets facilitate the thickening of challenging surfactant systems, such as sulfate-free formulas, effectively supporting the trend for milder cleansing in personal care. The 100% active, preservative-free solid is clearly soluble in water and processable at room temperature. Furthermore, ANTIL® 500 Pellets is stable against hydrolysis and effective over a wide pH range. The thickening agent provides a rich formulation texture with Newtonian flow behavior but without changing the foaming characteristics, which is essential for fulfilling the consumers’ sensorial expectations of personal cleansing products.

• ANTIL® CM 90

  Thickening agent for gels and paste formulations. Soluble in surfactants at 60°C.

• API Contract Manufacturing

  For the exclusive synthesis of API, HPAPI and intermediates, we bring together unique core competencies across chemistry, biotechnology and engineering. Combined with a proud record of performance for quality and supply, and a broad portfolio of advanced technologies, we can address the specific needs of even the largest or most complex projects. The advanced technology portfolio to address your specific project needs includes:

  • High-potency API
  • Continuous processing
  • PEGs & mPEGs
  • Carbohydrate chemistry
  • Polymer API
  • Microbial fermentation
  • Biocatalysis
  • Catalysis
  • Chiral chemistry
  • Cryogenic chemistry
   

• Aquaculture
• AquaPront®

  AquaPront® is a unique combination of protectant and moisturizing agents for instant wrinkle filling effects that also improves the skin condition and smoothens skin in depth over the longer term.

• AROSURF® MG 113

  ADOGEN® 113 is an iso-tridecyl ether amine.

• AROSURF® MG 13

  AROSURF® MG 13 is isotridecyl ether diamine & acetates (5% neutralized).

• AROSURF® MG 513

  AROSURF® MG 583 is an ether diamine made from C13 alcohol. 

• AROSURF® MG 70 A30

  Isodecyl Ether Primary Amine (Propanamine, 3-ISodecyloxy) and Acetates

• AROSURF® MG 98

  AROSURF® MG 98 is a mixture of octyl and decyl primary ether amine.

• AROSURF PA 873

  Nonionic blend

• AROSURF® PA 858

  Blend of non-ionic softeners

• AROSURF® PA-777

  Fatty quaternary blend

• AROSURF® PA-777 V

  Cationic/non-ionic proprietary blend, based on vegetable and synthetic raw materials.

• AROSURF® PA-842

  AROSURF® PA 842 is a non-volatile, FDA-sanctioned specialty formulation.

• AROSURF® PA-842 V

  Cationic proprietary blend, based on vegetable and synthetic raw materials.

• AROSURF® PA-844

  AROSURF® PA 844 is a non-volatile, FDA sanctioned specialty formulation which is added as a wet end softener/debonder for tissue or towel manufacture. AROSURF® PA 844 may be sprayed on a felt supported sheet as a topical softener.

• AROSURF® PA-852

  Weakly cationic blend

• AROSURF® PA-871

  Organic nonionic

• AROSURF® PA 935

  AROSURF® PA 935 is a high molecular weight hydrophilic polyether siloxane Emulsion.

• AROSURF® MG 70 A30

  Isodecyl Ether Primary Amine (Propanamine, 3-ISodecyloxy) and Acetates.

• AROSURF® TA 101

  Good softening performance and antistatic properties.

• AvailOm®

  A high-concentration, Omega-3 lysine complex for single, smaller supplements

  • A proprietary solution delivering by far the highest load Omega-3 powder in its class
  • Instantly available free fatty acids for bioavailability 3-5 times more than Ethyl Esters
  • Includes an additional dose of the amino acid Lysine, an essential nutrient
  • Comprising a high load, Omega-3 Lysine complex ideal for compression
  • Ongoing stability studies demonstrate oxidation values that are the best in class
  • Significantly higher bioavailability results even when taken as part of low fat diet
  • Free flowing powder form for easy handling, with various enteric coating options
  • Clear U.S. regulatory position
  • Made in the E.U. for high-quality standards

• AXOL® C 62 Pellets MB

  PEG-free emulsifier for O/W creams and lotions, based on vegetable raw materials. Stable emulsions from pH 5.0-8.0.Easy to process. Easy to process. Compatible with all kinds of cosmetic oils.

• Aerolyst® 2074

  Aerolyst® 2074 is a high purity aluminium oxide support material for fixed bed applications.

• Aerolyst® 3041

  Aerolyst® 3041 is a high purity silica extrudate. It is produced from AEROSIL®, Evonik’s high purity fumed silica.

• Aerolyst® 3045

  Aerolyst® 3045 is a high purity silica extrudate. It is produced from AEROSIL®, Evonik’s high purity fumed silica.

• Aerolyst® 3047

  Aerolyst® 3047 is a high purity silica extrudate. It is produced from AEROSIL®, Evonik’s high purity fumed silica.

• Aerolyst® 7711

  Aerolyst® 7711 is a high purity titania extrudate with a high anatase content. It is produced from AEROXIDE® TiO2 P 25, one of Evonik´s AEROXIDE® Fumed Metal Oxides.

• Aerolyst® BC 281

  Aerolyst® BC 281 is a catalyst especially for benzene chlorination purposes, supporting the Ethylene Dichloride (EDC) purification step within the Vinyl Chrloide Monomer (VCM) manufacturing process.